Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: ted_one on 26 September 2015, 18:40:59
-
My F/L 3.0 MV6 is going to Serek's in a couple of weeks time to have the cats changed,and was thinking belt and braces by replacing the O2 sensors at the same time. And looking at the Cambiare sensors on Fleabay, there seems to be ''variants'' listed for this model,and was wondering if someone can clear up what ones I'll need and how many. As described in a previous post the set up is... 3.2 manifolds and after market, type approved Klarius cats TIA :y
-
Just had both of mine moved by serek, i then replace both 02 sensors with new bosh ones, I was advised to by either bosh or ngk :y
-
This is on the 3.0 and its got a new full exhaust system and as far as I know it's just going to be putting every thing in the usual place without any mods as its a pre 2001 and I presume that there is'nt a need to do what has be done to our 3.2's .... I could be wrong though ::)
-
If fitting new lambadas, get either Bosch or ngk, oe are Bosch.
-
Will certainly take your advice......but what's all this ''variant'' stuff I'm reading,I get confused at putting me shoes on the right foot.Just don't want to take the wrong parts with me :-\
-
Will certainly take your advice......but what's all this ''variant'' stuff I'm reading,I get confused at putting me shoes on the right foot.Just don't want to take the wrong parts with me :-\
Your getting internet information overload.
go to local motor factor, and see what they offer.
I did have a pair of Bosch ones, but I cannot find them, so guess ive sold them. :(