Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: RobG on 01 November 2015, 09:57:35

Title: Sthil TS400 Disc Cutter problem
Post by: RobG on 01 November 2015, 09:57:35

No spark initially, so full service incl. all filters. new plug, new LT cable, new coil, new HT lead. Plenty of compression & fuel. Still no spark, any ideas :-\ :-\

Title: Re: Sthil TS400 Disc Cutter problem
Post by: Rods2 on 01 November 2015, 12:44:58

Check the on/off switch with a multimeter. One is open circuit, the other closed to the chassis. If all okay, check the carb diaphragm as they split!

Title: Re: Sthil TS400 Disc Cutter problem
Post by: Marks DTM Calib on 01 November 2015, 18:35:58

Checm the timing as I have seen one where the woodruff key sheared. Also make sure the coil to flywheel gap is correct (a piece of paper is a good gapping method)