Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: sjc on 10 December 2015, 22:01:29

Title: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: sjc on 10 December 2015, 22:01:29

Pair of good Xenons with aluminium adjusters fitted and good, clear lenses, complete with bulbs and ballasts.
£60 collected, £70 posted.

 (http://i1098.photobucket.com/albums/g373/sjcrossan/IMG_2786.jpg)

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: Gaffers on 11 December 2015, 09:36:53

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: Diamond Black Geezer on 11 December 2015, 09:45:12

I think logistically - yes (just a bit of chopping of wiring) legally - no. You'd need the levelling sensors on the axles. These, however, are pretty readily available, as many FLs got Xenons. FL CDX and Elite standard.  :)

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: steve6367 on 11 December 2015, 09:46:16

Quote from: Monsieur Guffer on 11 December 2015, 09:36:53

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

You would need a different headlight switch, Headlight levelling ECU, 2 x sensors and some wiring to convert.

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: steve6367 on 11 December 2015, 09:46:36

Quote from: steve6367 on 11 December 2015, 09:46:16

Quote from: Monsieur Guffer on 11 December 2015, 09:36:53

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

You would need a different headlight switch, Headlight levelling ECU, 2 x sensors and some wiring to convert. (without blinding those around you)

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: 05omegav6 on 11 December 2015, 09:48:18

Quote from: Monsieur Guffer on 11 December 2015, 09:36:53

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

Ignoring the fact that they won't fit your car without looking ridiculous... Facelift ones are a different shape ;)

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: 05omegav6 on 11 December 2015, 09:52:09

Apologies, that was rather flippant... You need the ecu, headlight washers plus associated gubbins, two level sensors, the loom and switch. Mv6/sports can ignore the headlight washer etc from the above list.

Hypothetically you can divert the dipped bead feed to the xenon ballast and leave it at that, but won't be legal.

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: Gaffers on 11 December 2015, 10:08:23

Ah I see, if they wont fit then it's a non-starter.

Can you tell this is my first facelift? ::)

Title: Re: FS: pair of MFL Xenon headlights with aluminium adjusters
Post by: steve6367 on 11 December 2015, 10:12:43

I missed that - FL has pointy corners as below  :y