Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: Entwood on 17 July 2008, 20:04:12

Title: Hose clip pliers
Post by: Entwood on 17 July 2008, 20:04:12

I'm fed up with trying to use mole grips, long nose pliers etc etc and knackering the clips eventually, so I'm looking to buy some pliers....

are these the sort of thing I need ??

http://cgi.ebay.co.uk/CLIC-CLIP-PLIERS-4-SNAP-CLIP-HOSE-CLIPS-ON-HOSES-ETC_W0QQitemZ170237353761QQcmdZViewItem?hash=item170237353761&_trksid=p3286.m14.l1318

or would these be better ??

http://cgi.ebay.co.uk/LONG-REACH-HOSE-SNAP-CLIP-PLIERS-USED-ON-ROVER-BMW-ETC_W0QQitemZ250268115184QQcmdZViewItem?hash=item250268115184&_trksid=p3286.m14.l1318

There seem to be rather a lot of different types, but I'm guessing "clic" or "clic-r" is the correct description ??

Title: Re: Hose clip pliers
Post by: Golfbuddy on 17 July 2008, 20:05:57

Mike Dundee bought some of those. He said they were rubbish.  :( I always use water pump pliers, they seem fine and I've not knackered a clip yet.  :)

Title: Re: Hose clip pliers
Post by: Jimbob on 17 July 2008, 20:16:36

I have basically the 1st pair...

Find them very handy, but not perfect.

Great for most the clips, including the funny little ones on the washer pipes.

Not the most easy things to use in confined spaces though, When I did HBV, great for getting clips off, but couldnt get the angles to put them back on, where tiny long nose vice grips did the job.


If mine broke, I would replace them, a good addition to your toolkit imho.

Title: Re: Hose clip pliers
Post by: Entwood on 17 July 2008, 20:28:03

Thanks for that .. so .. tools idea is good .. cheapy off fleabay is bad .. :)

Found these at what seems a good price ???

http://www.tooled-up.com/Product.asp?PID=141477

any one any drastic opinions before I spend me wonga  ?? .. :)

Title: Re: Hose clip pliers
Post by: Bandit127 on 17 July 2008, 20:38:18

Quote

Mike Dundee bought some of those. He said they were rubbish.  :( I always use water pump pliers, they seem fine and I've not knackered a clip yet.  :)

Without dout.
Plenty here:
http://www.screwfix.com/cats/A335533/Hand-Tools/Pliers-Cutters/Water-Pump-Pliers

They do this:
Have parallel jaws to match the clip tabs when the cip is open.
Have a huge mechanical advantage over pliers.
Give you the grip to manipulate the clip while you have hold of it.

The tool for the job...

Title: Re: Hose clip pliers
Post by: MikeDundee on 17 July 2008, 20:50:13

I have both pairs mentioned the first set is for the clips normaly on the breather hoses, the second set is for the hard to reach hose clips like HGV hose clips. I was shown how the second set work by Timbuk :y, they're fine, despite what Golfbuddy said I said :y.........No doubt the original post will get dragged up now ;D ;D  

Title: Re: Hose clip pliers
Post by: Golfbuddy on 17 July 2008, 20:52:41

Quote

I have both pairs mentioned the first set is for the clips normaly on the breather hoses, the second set is for the hard to reach hose clips like HGV hose clips. I was shown how the second set work by Timbuk :y, they're fine, despite what Golfbuddy said I said :y.........No doubt the original post will get dragged up now ;D ;D  

 ;D ;D ;D

You clearly failed to mention that the tool was fine, it was the user that was rubbish then.  ;D ;D

Nevertheless, I still use waterpump pliers and find them perfect.  :y

Title: Re: Hose clip pliers
Post by: Taxi_Driver on 17 July 2008, 21:06:20

Ive got one........think its looks like the one in the 1st link on your first post........works fine for me.....got mine from Halfrauds......bout £5-£6ish iirc  :y

Title: Re: Hose clip pliers
Post by: Taxi_Driver on 17 July 2008, 21:12:10

Shud add ive taken clips off that look as tho there not intended to come off intack.......ie fuel pump clips..and put them back on again!! with the tool........ :y