Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: raywilb on 30 January 2016, 16:28:50
-
just tried entering radio codes after battery disconnect. ive only had the car for 2weeks & got the code from the car pass. had 3 attempts to no avail. now its in a safe mode & 7safe.. appears but not letting me enter anything. have left it & was having a look at the audio book & have found another card with a different code written on it. obviously a radio change has happened. can anyone please advise me how long it will take before I get the beep to let me continue.
-
Time increases efter each incorrect attempt. It should tell you in the audio manual by how much
Best leave it until tomorrow & try again with the other code IMO
HTH
-
Means that you will need to leave the radio and ignition switched on for up to 2 hours to reset before you enter another code number
-
Means that you will need to leave the radio and ignition switched on for up to 2 hours to reset before you enter another code number
Should have said that in my post . . .well spotted RobG
I seem to remember that after 8 or so attempts time wait is something like 10 hours :-\
But as said audio manual should tell you
-
Clearly the code you have is incorrect. Pull radio out and see if anyone has written code on it, failing that its probably going to need professional services to get the code.
Dave DND runs a car audio business, might be worth a PM for costs etc.
-
Clearly the code you have is incorrect. Pull radio out and see if anyone has written code on it, failing that its probably going to need professional services to get the code.
Dave DND runs a car audio business, might be worth a PM for costs etc.
OP says in his post that he has found a second code written in a second audio manual . . .
It must be worth at least one attempt :-\
-
Sorry, yes, worth a shot.
I'm ill, go easy on me ;D
-
Means that you will need to leave the radio and ignition switched on for up to 2 hours to reset before you enter another code number
I suppose the engine running will be ok. it seems either run out of diesel or have a flat battery :'( :y
-
Means that you will need to leave the radio and ignition switched on for up to 2 hours to reset before you enter another code number
I suppose the engine running will be ok. it seems either run out of diesel or have a flat battery :'( :y
You've lost me now ??? ???
-
Don`t keep banging away with incorrect codes - some radios are actually irretrieveable when locked !!
Which Vauxhall radio do you have?
http://www.dndservices.co.uk/manufacturers_d.php?manufacturerid=39&mmode=decode
-
Don`t keep banging away with incorrect codes - some radios are actually irretrieveable when locked !!
Which Vauxhall radio do you have?
http://www.dndservices.co.uk/manufacturers_d.php?manufacturerid=39&mmode=decode
its a ccr 2006. I finally got the 4 dashes enabling me to type a code in, but think I did it wrong. the numbers I tapped in were probably right but I did not press the AS between numbers , should I have ?
-
Don`t keep banging away with incorrect codes - some radios are actually irretrieveable when locked !!
Which Vauxhall radio do you have?
http://www.dndservices.co.uk/manufacturers_d.php?manufacturerid=39&mmode=decode
its a CCR2006 . today I finally got the mode where I could enter a code. the digits I entered were probably ok, I tapped them in but should I have pressed the AS button between each number entered.? if yes then that's where I am going wrong ( I had a hiccup with posting excuse me. I repeated myself sorry
-
Don`t keep banging away with incorrect codes - some radios are actually irretrieveable when locked !!
Which Vauxhall radio do you have?
http://www.dndservices.co.uk/manufacturers_d.php?manufacturerid=39&mmode=decode
its a CCR2006 . today I finally got the mode where I could enter a code. the digits I entered were probably ok, I tapped them in but should I have pressed the AS button between each number entered.? if yes then that's where I am going wrong,
No
I think you now have to assume the code is wrong
-
Code Entry as Follows:
Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps
Sounds like your code is wrong, so follow this link and send it to me
http://www.dndservices.co.uk/vauxhall-ccr-2006-e-dnd1903.html