Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: zirk on 14 February 2016, 16:33:13

Title: Radio Safe - 2013 HU
Post by: zirk on 14 February 2016, 16:33:13

Flashes up and Bleeps at me, is this what I think it is, some sort of de pair issue.

Its all working fine in Main, BC etc, but comes up in Tuner, CD and EQ /Fader mode, 2013 + CID.

Is this a Tech II chat needed or can I do some trickery my end, and do I need the Code, which I don't have.

Title: Re: Radio Safe - 2013 HU
Post by: TheBoy on 14 February 2016, 17:18:22

Was it paired before?

If so, sounds like the front board of the NCDC has lost its NV config.  Saw a spate of that 2 or 3 years back.  Needs Tech2 and pairing code.

Title: Re: Radio Safe - 2013 HU
Post by: zirk on 15 February 2016, 14:44:42

Ok, thanks TB, I'll try and get the code sorted out, also noticed steering wheel controls don't work either, guessing that could be part of the same deal so will forget that for the time being.  :y

Title: Re: Radio Safe - 2013 HU
Post by: TheBoy on 15 February 2016, 17:47:55

I suspect being a CAN car, any misconfigurations will leave errors all over the place. Certainly I'd expect errors in the CIM.

Title: Re: Radio Safe - 2013 HU
Post by: Marks DTM Calib on 16 February 2016, 16:20:14

Steering wheel controls are resistors and switches so not CAN but, could be they are decoded by the same processor circuit that is having a wobble

Title: Re: Radio Safe - 2013 HU
Post by: TheBoy on 16 February 2016, 18:26:38

Quote from: Marks DTM Calib on 16 February 2016, 16:20:14

Steering wheel controls are resistors and switches so not CAN but, could be they are decoded by the same processor circuit that is having a wobble

Sorry, I was thinking of later Vectras.

Ah, bit of insider info, this isn't an Omega  :-X

Title: Re: Radio Safe - 2013 HU
Post by: zirk on 16 February 2016, 18:35:54

Yea, sorry, NCDC2013 and CID in a 2003 Vectra C.