Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: pauls on 03 March 2016, 22:21:42

Title: wire checking
Post by: pauls on 03 March 2016, 22:21:42

I need to check the wires from the 02 sensor plug to the ecu. My question is does anybody have a diagram or a picture of the plug at the ecu end to tell me which pins belong to the 02 sensor so that i dont have to unpick all.

Title: Re: wire checking
Post by: Kevin Wood on 03 March 2016, 23:13:20

Yes, probably. I'll have a look for the diagram, but the info is probably in an LPG install guide here somewhere.

Title: Re: wire checking
Post by: 05omegav6 on 03 March 2016, 23:26:23

Did I not list them in a previous pm :-\

If not will dig them out in the morning... labled the looms that I separated, just need to know which sensor is which as the wiring diagram doesn't call then bank 1/sensor 1 etc ::)

Title: Re: wire checking
Post by: pauls on 03 March 2016, 23:33:19

Quote from: Harris K Telemacher on 03 March 2016, 23:26:23

Did I not list them in a previous pm :-\

If not will dig them out in the morning... labled the looms that I separated, just need to know which sensor is which as the wiring diagram doesn't call then bank 1/sensor 1 etc ::)

No Al, i dont think we got that far..

Title: Re: wire checking
Post by: 05omegav6 on 03 March 2016, 23:42:32

Ok, I remember cross referencing the wiring diagram and writing labels... thought I had typed them too :-\