Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: X30XE on 17 March 2016, 20:30:32
-
...complete with ballast, bulbs and levelling shizz. To direct plug into W reg ideally :y
-
...complete with ballast, bulbs and levelling shizz. To direct plug into W reg ideally :y
Grill in bonnet or grill in bumper? Could just be either :-\
-
Says in subject f/l. ::)
-
These are officially as rare as hens teeth now :(
-
These are officially as rare as hens teeth now :(
I made one up for the Elite out of the parts I had, which parts are good on yours. I may have the other parts you need but not complete units. ;) :y
-
Appreciate the offer Joff, however one of the previous custodians of the car appears to have cheapskated and downgraded the xenon units for halogen ones (one of which has an ali adjuster in so it's been opened up before) and then pikey wired it into the hid loom plugs. The O/S reflector mounts appear to be shot as it's wiggling in the breeze also. So as such I have nothing useful to build on currently. :(
The only blessing being that the hid plugs are all intact and present so when I eventually do find some they *should* just plug straight in. *fingers crossed*
-
Appreciate the offer Joff, however one of the previous custodians of the car appears to have cheapskated and downgraded the xenon units for halogen ones (one of which has an ali adjuster in so it's been opened up before) and then pikey wired it into the hid loom plugs. The O/S reflector mounts appear to be shot as it's wiggling in the breeze also. So as such I have nothing useful to build on currently. :(
The only blessing being that the hid plugs are all intact and present so when I eventually do find some they *should* just plug straight in. *fingers crossed*
I`ll be breaking my Miggy either this weekend or next, do you need the looms or just the leveling sensors?
-
Appreciate the offer Joff, however one of the previous custodians of the car appears to have cheapskated and downgraded the xenon units for halogen ones (one of which has an ali adjuster in so it's been opened up before) and then pikey wired it into the hid loom plugs. The O/S reflector mounts appear to be shot as it's wiggling in the breeze also. So as such I have nothing useful to build on currently. :(
The only blessing being that the hid plugs are all intact and present so when I eventually do find some they *should* just plug straight in. *fingers crossed*
I`ll be breaking my Miggy either this weekend or next, do you need the looms or just the leveling sensors?
Neither; two headlamp units please :P :D
-
[Close thread]
Mot tester managed to bodge the bodged halogens to get it through.