Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: annihilator on 23 April 2016, 17:48:20

Title: irmscher bumpers
Post by: annihilator on 23 April 2016, 17:48:20

Hi,will an irmscher saloon facelift front bumper and rear valance fit a '95 saloon.
Cheers John.

Title: Re: irmscher bumpers
Post by: ted_one on 23 April 2016, 17:58:52

They'd fit my car much better ;D

Title: Re: irmscher bumpers
Post by: annihilator on 23 April 2016, 18:13:11

you need to find it first also made a mistake it's a full rear bumper not a valance. ;D

Title: Re: irmscher bumpers
Post by: ted_one on 23 April 2016, 20:42:15

I could probably sell you a couple....the only thing is they come with the cars attached :)

Title: Re: irmscher bumpers
Post by: ffcgary1 on 23 April 2016, 21:50:50

Got a front pre facelift irmscher bumper here for sale. with the modified reinforcement bar, air dam needs some minor repairs and paint ( curently z359 jungle green). it is compleat with spotlights and stainless spot light brackets.
£100
can deliver depending on distance or meet approx 1/2 way.
Gary.

Title: Re: irmscher bumpers
Post by: RobG on 24 April 2016, 09:12:33

Quote from: annihilator on 23 April 2016, 18:13:11

you need to find it first also made a mistake it's a full rear bumper not a valance. ;D

Standard F/L bumper will fit so can`t see why the Irmscher one won`t fit either
(http://i190.photobucket.com/albums/z257/belisensis/MFLbumper_zpsae0fe137.jpg) (http://s190.photobucket.com/user/belisensis/media/MFLbumper_zpsae0fe137.jpg.html)
(http://i190.photobucket.com/albums/z257/belisensis/FLBUMPERonMFL_zps5a088acb.jpg) (http://s190.photobucket.com/user/belisensis/media/FLBUMPERonMFL_zps5a088acb.jpg.html)

Title: Re: irmscher bumpers
Post by: RN55ONE on 24 April 2016, 09:21:30

Should fit.

This seller has Irmscher stuff for sale plus other bits and bobs:
http://www.ebay.co.uk/itm/Vauxhall-omega-exhaust-/121965358756?

Title: Re: irmscher bumpers
Post by: annihilator on 24 April 2016, 09:24:03

Cheers rob,had done a bit of browsing last night and saw that post just concerned about the front grill area but should only need the 3 holes drilling for the lugs on the pre-face grille.
John  :y

Title: Re: irmscher bumpers
Post by: TheBoy on 24 April 2016, 10:43:10

Rear will go on easily (ignoring exhaust if twin exit bumper), front I think you'll struggle to get to look right due to subtle changes.

Title: Re: irmscher bumpers
Post by: serek on 24 April 2016, 11:00:06

at the front you really swap whole front end to look good

Title: Re: irmscher bumpers
Post by: annihilator on 24 April 2016, 11:42:18

Cheers for the info everyone  :y
John.

Title: Re: irmscher bumpers
Post by: gstylebaby on 25 April 2016, 01:56:29

That is what I was going to do....I searched hi and low and got all the parts and then never got round to getting it done boooo. Now the car sits on my drive taking up space and the kit sits in my garage lol. It can be done mate.
http://www.pbase.com/elvin315/image/84477322 (http://www.pbase.com/elvin315/image/84477322)
http://www.pbase.com/elvin315/image/84477323 (http://www.pbase.com/elvin315/image/84477323)