Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: manolo on 19 May 2016, 08:31:02

Title: P0135
Post by: manolo on 19 May 2016, 08:31:02

Hi
please, need advice.
get error P0135 (O2 sensor heater circuit multifunction bank 1 sensor 1) After switching place with other side O2 sensor (bank 2 sensor 1) get the same error P0135?
any advice?
THX

Title: Re: P0135
Post by: frostbite on 19 May 2016, 08:34:44

You have a duff sensor that needs replacing

Title: Re: P0135
Post by: manolo on 19 May 2016, 08:40:31

Quote from: frostbite on 19 May 2016, 08:34:44

You have a duff sensor that needs replacing

and why didn't I get new error code P0155 (O2 Sensor Heater Circuit Malfunction Bank 2 Sensor 1) ?

Title: Re: P0135
Post by: 05omegav6 on 19 May 2016, 08:40:41

Quote from: frostbite on 19 May 2016, 08:34:44

You have a duff sensor that needs replacing

More likely a loom fault if switching sensors changes nothing :y

Title: Re: P0135
Post by: 05omegav6 on 19 May 2016, 08:41:09

What engine?

Title: Re: P0135
Post by: manolo on 19 May 2016, 08:46:21

y26se

whats mean loom fault?

Title: Re: P0135
Post by: 05omegav6 on 19 May 2016, 09:16:43

There's likely a break in the heater wire to that particular sensor position.

Probably at a crimped connection in the cable tray next to the plenum, assuming the heater circuit is the common feed :y