Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Martin Nash on 11 July 2016, 12:28:43
-
Hi All
Would anyone have a Dash temperature gauge only my gauge is not working. The sender has been replaced by my local garage but the temperature still shows the engine cold with the needle not climbing? Chalky at tha garage has told me that this is quite unusual to go wrong but this does seem to be the case!
Regards,
Martin
-
What engine, and did they replace correct temp sender (there are 2).
Place palm of hand on rev counter, and smartly, firmly press back - it dash feels like it reseated (you'll know!), try again.
Failing that, if near me, pop it round, we'll have a look.
-
Test the gauge by earthing the single blue wire from the sender ... the gauge should show fully hot
-
Although the sender was replaced the garage did check the gauge in the dash with what I would assume was an amp meter and this showed that it was giving no current completely dead!! :(
Regards,
Martin
-
Just for reference the Omega is 3ltr elite.
-
Although the sender was replaced the garage did check the gauge in the dash with what I would assume was an amp meter and this showed that it was giving no current completely dead!! :(
Regards,
Martin
Replacing the wrong sender won't have fixed it...
-
Thanks Doctor Gollum
I will check that with the garage!
-
Thanks Doctor Gollum
I will check that with the garage!
ECU Coolant Temperature Sensor...
https://goo.gl/images/wNqtng
Temperature Gauge Sender...
https://goo.gl/images/CbLN4R
:y