Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: baggers on 31 July 2016, 17:03:59
-
Replaced downpipe flexi yesterday. The flexi is fitted at an angle to change direction of pipe but the pipe that protrudes into the flexi isn't trimmed down and restricts a 54mm downpipe by about 15mm. I've now trimmed that out to give the full flow, might expect it from some cheap and nasty but not from a genuine pipe.
(http://iancctv.dyndns.tv:81/exhaust)
Old flex
(http://iancctv.dyndns.tv:81/oldflex)
New flex
(http://iancctv.dyndns.tv:81/newflex)
(http://iancctv.dyndns.tv:81/fittedflex)