Omega Owners Forum

Chat Area => General Car Chat => Topic started by: Diamond Black Geezer on 31 October 2016, 08:56:14

Title: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Diamond Black Geezer on 31 October 2016, 08:56:14
As above. Went to see a broken 2.6 2003 CDX at the weekend. Only discovered the rarities about it when I arrived.

-Z157 - Front OS wing has a dent in the top, back doors have been covered in filler and resprayed, boot, bonnet, front doors, front bumper are all (I think) good
-MV6 / 7 spoke alloys. The 17" ones that are fairly rare - heavily kerbed, two tyres good, two poor
-black leather interior. (being CDX it's not full electric) but in the fairly sought-after 'grainy' leather.


Not really practical for me to get back out there to strip bits, If I bring home any more car parts that aren't even mine, but what I've got for an OOFer I think MIss DBG will understandably chop something off as I sleep.  :D

If you're interested in anything let me know, I'll get in touch with the bloke, see if it can be stripped before it goes to become a chinese washing machine.


It's going ''End of the week at the latest'', so realistically over the next couple of days.  :y
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Doctor Gollum on 31 October 2016, 10:57:25
Cdx wheels are 16" 7 spoke...

Mv6 are 17" 10 spoke Irmscher (mfl), dished 5 spoke (early facelift), 6 spoke Elite (late facelift).

Anything else is either Euroland or Vectra C :-X
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Diamond Black Geezer on 31 October 2016, 11:09:04
It's these ones.... 6 spoke, not 7, then. I wasn't really counting spokes....

(http://i.ebayimg.com/00/s/MTE1M1gxNjAw/z/Dy8AAOSwwpdW~B5b/$_1.JPG)
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Doctor Gollum on 31 October 2016, 12:33:38
Later Elite ones then :y
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Diamond Black Geezer on 31 October 2016, 13:21:59
Pretty sure they were also used on late MV6s, but all well perhaps not :)

Point being - those alloys pictured are on it.  :y
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Doctor Gollum on 31 October 2016, 13:24:06
Pretty sure they were also used on late MV6s, yup, as above :y

Point being - those alloys pictured are on it.  :y
A picture paints a thousand words and all that jazz :D
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Diamond Black Geezer on 31 October 2016, 13:28:25
Certainly true going by a couple of Avatars on here I could mention...  :)  :D
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: biggriffin on 31 October 2016, 16:38:33
As above. Went to see a broken 2.6 2003 CDX at the weekend. Only discovered the rarities about it when I arrived.

-Z157 - Front OS wing has a dent in the top, back doors have been covered in filler and resprayed, boot, bonnet, front doors, front bumper are all (I think) good
-MV6 / 7 spoke alloys. The 17" ones that are fairly rare - heavily kerbed, two tyres good, two poor
-black leather interior. (being CDX it's not full electric) but in the fairly sought-after grainyleather.


Not really practical for me to get back out there to strip bits, If I bring home any more car parts that aren't even mine, but what I've got for an OOFer I think MIss DBG will understandably chop something off as I sleep.  :D

If you're interested in anything let me know, I'll get in touch with the bloke, see if it can be stripped before it goes to become a chinese washing machine.


It's going ''End of the week at the latest'', so realistically over the next couple of days.  :y

Got a slate grey set here in hoof'land
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: zirk on 31 October 2016, 17:26:54
Pretty sure they were also used on late MV6s, but all well perhaps not :)

Point being - those alloys pictured are on it.  :y
Yes correct, very last ones were shared between MV6 and Elite, but DG already said that - Mv6 are 17" 10 spoke Irmscher (mfl), dished 5 spoke (early facelift), 6 spoke Elite (late facelift).

Keep up at the back.  ;)
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Diamond Black Geezer on 01 November 2016, 09:32:59
Well.. trying to bring this back on topic... no-one interested, then? Thought there were a couple on here after Z157 panels and the late leather etc. I got all that was useful to me off it, anyway.  :)   I'll tell him sling it to the scrap man :y
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: EMD on 01 November 2016, 09:55:08
Well.. trying to bring this back on topic... no-one interested, then? Thought there were a couple on here after Z157 panels and the late leather etc. I got all that was useful to me off it, anyway.  :)   I'll tell him sling it to the scrap man :y

Thats a rare colour  ::) ;D Now if they had been Black Sapphire i would have snapped your cats off for them  ;D
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Diamond Black Geezer on 01 November 2016, 10:01:26
Haha. Well, black is better  ;)
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Steve B on 01 November 2016, 10:52:29
They are on mine  :y

(https://dl.dropboxusercontent.com/u/70807181/IMG_7984.JPG)
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: Entwood on 01 November 2016, 14:32:32
I've suggested this guy might wish to contact you .. he's pretty new so might need assistance ..

http://www.omegaowners.com/forum/index.php?topic=137737.0
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: lloyd3213 on 01 November 2016, 14:39:59
If the glovebox mechanism/handle is going, I would very much be interested  ::)
Title: Re: 2.6 Z157 with 'grainy' black leather - going in the BIN in a few days
Post by: atann on 02 November 2016, 18:37:26
As above. Went to see a broken 2.6 2003 CDX at the weekend. Only discovered the rarities about it when I arrived.

-Z157 - Front OS wing has a dent in the top, back doors have been covered in filler and resprayed, boot, bonnet, front doors, front bumper are all (I think) good
-MV6 / 7 spoke alloys. The 17" ones that are fairly rare - heavily kerbed, two tyres good, two poor
-black leather interior. (being CDX it's not full electric) but in the fairly sought-after 'grainy' leather.


Not really practical for me to get back out there to strip bits, If I bring home any more car parts that aren't even mine, but what I've got for an OOFer I think MIss DBG will understandably chop something off as I sleep.  :D

If you're interested in anything let me know, I'll get in touch with the bloke, see if it can be stripped before it goes to become a chinese washing machine.


It's going ''End of the week at the latest'', so realistically over the next couple of days.  :y

Stereo Head unit if it works and has the code. CCR 2006? Front and rear cigarette lighters, if they work. Many thanks.