Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: EMD on 23 November 2016, 11:57:13
-
Speedo keeps bouncing and not working every now and then ??? Only seems to happen when its colder . soon as the car has warmed up on a run the speedo jumps into life ??? New speedo or just a loose connection :-\
-
Try reseating the cluster...
But we've had this conversation before... bouncing leads to needing a new cluster when the speedo finally dies.
Presume abs/tc lights working as normal :-\
-
Try reseating the cluster...
But we've had this conversation before... bouncing leads to needing a new cluster when the speedo finally dies.
Presume abs/tc lights working as normal :-\
Aye :)
-
Are all Omega speedo's the same ? There is one from a 2.2 16v for sale :)
-
Speedos all the same, I think, however, the whole binnacle will differ from petrol to diesel (think the glowplug light, for instance) so any old binnacle may well plug in fine, but you's no doubt have certain issues. Might well be possible to install just the speedo into your existing binnacle, thought suspect it's going to be far easier to get the 'right' one in the first place.
Yours is V6 yes? Should be the easiest binnacle to source on here, surely?
-
I have a 2.6 binnacle if you are wanting one EMD
-
Are all Omega speedo's the same ? There is one from a 2.2 16v for sale :)
No. 4 pots go to 140mph, V6 go to 160mph :y
-
Bugger, yes, of course, 4 pots will read slower, too. I suppose the spacing between each increment would be different, too, throwing the readout off by a fair bit. have to check on the spares Omega, that's a 2.0...
-
Speedos vary with engine and age. Pre 1998, its horrifically complex.
-
I have a 2.6 binnacle if you are wanting one EMD
Thanks for that offer omegod ;) Ive taken the panel out then cleaned the connections . Seems to be working ok for now but wonder if its a sign its on its way out :-\ It happened last year when the cold weather started but fine in the warmer months ???