Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: The Barge Captain on 29 November 2006, 14:00:58
-
How long to change the plugs? Even the dreaded Haynes didn't tell me to remove the wipers (and i had to!)
Never know a car like it for having to get the wipers off for every little poxy job. Anybody come up with a quick release for them yet?
-
How long to change the plugs? Even the dreaded Haynes didn't tell me to remove the wipers (and i had to!)
Never know a car like it for having to get the wipers off for every little poxy job. Anybody come up with a quick release for them yet?
Don't have to remove the wipers, Cap'n, just invest in a flexible socket extension. Took me about an hour (although I didn't tighten one plug up enough and had to get to it again yesterday).
-
It all went a bit Pete Tong as the lead for no.6 was stuck in the hole and i couldn't get it out withoout removing the scuttle for better access
-
You could use one of these to get the wiper arm off.
http://www.toolsnstuff.co.uk/product_info.php?pName=WXPERT-QUALITY-WINDSCREEN-WIPER-REMOVAL-TOOL&products_id=13381
-
Took me about 10hrs, including the cam covers. Woulda taken longer if I had to take the scuttle off. ;)
-
You could use one of these to get the wiper arm off.
http://www.toolsnstuff.co.uk/product_info.php?pName=WXPERT-QUALITY-WINDSCREEN-WIPER-REMOVAL-TOOL&products_id=13381
I used an identical one to that (branded laser) - what a waste of space that was! The prongs at the bottom just bent and the tool slipped off ... ::)
-
I allways make sure I get the right ones from the dealers as it's about an hour round trip to change em! ;D
-
Can do it about an hour now ;) took lots longer first time though. maybe its why you only change them every 40K
-
yup abut an hour for me too - not the easiest routine job is it ? :-/
-
On my old CDX v6, I changed them in halfrauds car park, with a semi-flexible spark plug spanner, and a couple of small spanners to remove the ICV/Loom at the LHS of the enigine. Not really a bad job. the leads seem to not want to come out at the back, but they will come out in a certain way.....
I would say 45 mins to one hour if not an expert...
-
The joys of a 4 pot ;D
-
I prepared a whole array of flexible tools to deal with the dreaded rear passenger-side plug, but it went a doodle no problems at all.
Old plug out…
(http://img294.imageshack.us/img294/2287/image026tj2.jpg) (http://imageshack.us)
New plug in…
(http://img321.imageshack.us/img321/9195/image038bd8.jpg) (http://imageshack.us)
As long s you have the correct lengths of extensions (need to combine a few to get the correct height) there’s no problem…
-
It was just struggeling to get #6 lead off that took an extra 15 mins over average
-
Ohhh...:)
2.6, no HT leads.... :y