Omega Owners Forum
Chat Area => General Car Chat => Topic started by: EMD on 16 February 2017, 21:51:28
-
Im looking to get a fitted stainless steel cat back exhaust , maybe exit either side but has anyone got a recommendation for a make or place where they make and fit them ( Northamptonshire/Leicestershire ). Also any guide as to what the price would be :y
-
Jetex used to be recommended on OOF, Not sure if they still are or not the best option available out there now. Full Jetex: https://www.ebay.co.uk/itm/110833233555
I've got a stainless 2-1 with one centre silencer, I was going to get the whole Jetex but couldn't justify the cost. But wasn't completely happy with the way the car sounded. So tried a straight pipe from the centre silancer (no back box) was fun for awhile but not good for cruising... The drone never gave me a headache but it was tiring.
So bought a Jetex back box and it's been like that for almost a year now no issues, Sounds good and looks good to me anyway. This back box: http://m.ebay.co.uk/itm/300606283576?_mwBanner=1 I didn't pay this much I bought mine directly from Jetex but can't find it on their site now.
-
Jetex used to be recommended on OOF, Not sure if they still are or not the best option available out there now. Full Jetex: https://www.ebay.co.uk/itm/110833233555
I've got a stainless 2-1 with one centre silencer, I was going to get the whole Jetex but couldn't justify the cost. But wasn't completely happy with the way the car sounded. So tried a straight pipe from the centre silancer (no back box) was fun for awhile but not good for cruising... The drone never gave me a headache but it was tiring.
So bought a Jetex back box and it's been like that for almost a year now no issues, Sounds good and looks good to me anyway. This back box: http://m.ebay.co.uk/itm/300606283576?_mwBanner=1 I didn't pay this much I bought mine directly from Jetex but can't find it on their site now.
I doubt you will get a Jetex now, I enquired about four years ago and there weren`t any in stock and would only make another run if enough orders were placed.
Jetex would be my No1 choice, SJC was considering selling his at one point and would be a good second hand buy, fit and finish is superb and the tone is just right ;)
-
Spotted this on eBay: https://www.ebay.co.uk/itm/361540446756
Might be worth looking into.
-
Spotted this on eBay: https://www.ebay.co.uk/itm/361540446756
Might be worth looking into.
Had a email back from profusion exhausts but they want to get the car in to have a look and design a bespoke one ... think they start from £400 but fitting is in Lundun ::) It mite be worth the trip going by all the reviews on the site but that link to the ebay one looks ok ;)
-
It took me ages but finally found a used jetex stainless system on eBay so they do pop up now and then, don't think I'd like to pay the full retail price!
-
It took me ages but finally found a used jetex stainless system on eBay so they do pop up now and then, don't think I'd like to pay the full retail price!
They are worth the money though and you know they have had proper R&D, Jetex were recommended by Blydenstein.
-
Spotted this on eBay: https://www.ebay.co.uk/itm/361540446756
Might be worth looking into.
Had a email back from profusion exhausts but they want to get the car in to have a look and design a bespoke one ... think they start from £400 but fitting is in Lundun ::) It mite be worth the trip going by all the reviews on the site but that link to the ebay one looks ok ;)
Mine is a profusion back box. It sounds great not boy racer and not to loud at speed.
-
I still have a catback exhaust system that I had built for my Omega, which fits the Irmscher twin exit kitted rear bumper perfectly, it was built with performance in mind and worked perfectly... and sounded fantastic too...
-
Im looking to get a fitted stainless steel cat back exhaust , maybe exit either side but has anyone got a recommendation for a make or place where they make and fit them ( Northamptonshire/Leicestershire ). Also any guide as to what the price would be :y
got mine booked in at long life Peterborough
they going to build like factory system 2x mid section then go to back box back box with twin exit to suit irmscher bumper
-
Im looking to get a fitted stainless steel cat back exhaust , maybe exit either side but has anyone got a recommendation for a make or place where they make and fit them ( Northamptonshire/Leicestershire ). Also any guide as to what the price would be :y
got mine booked in at long life Peterborough
they going to build like factory system 2x mid section then go to back box back box with twin exit to suit irmscher bumper
Hi serek , will be interested in how that all goes and what price it all comes to when its all done ;)
-
Long Life are pretty good, you can also specify your spec, Performance, noise level etc.
Is your for Saloon or Estate, may be able to help with a second hand one.
-
Spotted this on eBay: https://www.ebay.co.uk/itm/361540446756
Might be worth looking into.
There is a Dutch member who fitted one of those, was in the gallery section, at that price just buy it, and get young bear to fit it,
It's a very well made system that's also twin box like O.E..I f I had the money I'd buy one tomorrow. :y
-
Long Life are pretty good, you can also specify your spec, Performance, noise level etc.
Is your for Saloon or Estate, may be able to help with a second hand one.
Send me a pm zirk of details about the exhaust and price ect ;) ps.. its a saloon .
Spotted this on eBay: https://www.ebay.co.uk/itm/361540446756
Might be worth looking into.
There is a Dutch member who fitted one of those, was in the gallery section, at that price just buy it, and get young bear to fit it,
It's a very well made system that's also twin box like O.E..I f I had the money I'd buy one tomorrow. :y
Tis tempting imust say , wonder how much serek is paying for his system :)