Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Elite_L0ver on 19 February 2017, 20:04:49

Title: Audio Change
Post by: Elite_L0ver on 19 February 2017, 20:04:49
Just a quick question can i change my radio and display to incorparate sat nav screen something like the siemens NCDC 2013
Title: Re: Audio Change
Post by: Doctor Gollum on 19 February 2017, 20:24:45
You can, but you ideally need the entire setup from a non Elite car as the Bose aspect will cause no end of headaches.
Title: Re: Audio Change
Post by: Elite_L0ver on 19 February 2017, 20:32:40
Quote from: Doctor Gollum on 19 February 2017, 20:24:45
You can, but you ideally need the entire setup from a non Elite car as the Bose aspect will cause no end of headaches.

So a cdx etc non bose system is there a how too
Title: Re: Audio Change
Post by: Doctor Gollum on 19 February 2017, 20:34:59
Should be in the guides somewhere :y

But first reawd the caveats at the top of this section ;)
Title: Re: Audio Change
Post by: Elite_L0ver on 19 February 2017, 20:37:08
Quote from: Doctor Gollum on 19 February 2017, 20:34:59
Should be in the guides somewhere :y

But first reawd the caveats at the top of this section ;)

Sorry something i missed :(
Title: Re: Audio Change
Post by: Andy H on 19 February 2017, 20:37:45
Quote from: Doctor Gollum on 19 February 2017, 20:24:45
You can, but you ideally need the entire setup from a non Elite car as the Bose aspect will cause no end of headaches.
On the lesser HUs the BOSE enabled versions can be configured for normal 4Ohm outupt using Tech 2. isn't this the case for the NCDC2013?
Title: Re: Audio Change
Post by: zirk on 19 February 2017, 23:59:00
Or just try and grab a system from an MV6 Model.
Title: Re: Audio Change
Post by: Dave DND on 20 February 2017, 11:10:12
Quote from: Andy H on 19 February 2017, 20:37:45
Quote from: Doctor Gollum on 19 February 2017, 20:24:45
You can, but you ideally need the entire setup from a non Elite car as the Bose aspect will cause no end of headaches.
On the lesser HUs the BOSE enabled versions can be configured for normal 4Ohm outupt using Tech 2.

A common misconception - not all stereos can be configured from BOSE to NON-BOSE (or Vice Versa) with Tech 2 (or similar)

Many have been caught out with that one.

(http://www.dndservices.co.uk/smiley/geek.gif)