Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Jan Suhr on 09 March 2017, 18:21:19
-
We all know how easy it is to break the soldered contacts to the battery holder in the remote key and if you have it is a hassle to get the battery to connect properly. Folder paper is often used to press the battery down and hopefully match the contacts.
Today I needed to change the battery and I couldn't get it to match up. Since it was loose on one of the connections and the other was very flexible I thought that this could probably be fixed if I could solder some thin wires in and connect the battery to them.
It worked.
Here is how I did it.
(http://www.protouring.se/files/omega/key1.jpg)
Soldering in the cables
(http://www.protouring.se/files/omega/key2.jpg)
Then put the wires in place so they connect to the battery.
(http://www.protouring.se/files/omega/Key3.jpg)
And here it is in place.
Remote now works as if it were new!!
Jan