Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: GIANT DRAGON on 02 May 2017, 22:26:59
-
Hi need a puzzle solving please, i've just changed the prop rear rubber (Doughnut). but my 53 reg 2.2 auto still judders when going backwards? seems ok if left for it to reverse naturally, but any throttle, then it judders. Thanks in advance.
-
Any ideas please...
-
Does it do it under any circumstances going forwards (light throttle high load etc?)
-
No only as described, drives mint otherwise. Thanks. hence why we thought it was the rubber doughnut.
-
Have you checked the oil in the diff? (any noise droaning)
Whats the state of the diff bushes? (the diff twists the other way when it goes backwards)
There are 2 of those flex discs and a dodgy centre bearing
-
Thanks i'll change the diff oil 1st, no noises though? i was thinking of changing the Auto Gear Selector Switch.?? no idea of inside Diff........yet :) Cheers :y
-
The pnp switch get filled with gunk, I had to clean mine out as it had a waxy substance inside, which I think is a mixture of dielectric grease and A/C condesate.
Made all the lights come on but drive normally
-
Mine drives perfect forward or reverse normally but does have a slight noticeable vibration when I have a lot of weight in the boot. Not sure if this is a weight issue or angle of driveshaft issue.will be checking props shaft rubbers ,centre bearing and for any other looseness anywhere. Whatever you eventually find with yours I will check also ,and if I find anything that you may need to check I will report back here !
-
ok thanks everyone for your advice so far :y :y