Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: raywilb on 09 May 2017, 02:04:15
-
whilst doing the brake pipes ( front ) the union to caliper are a standard size so an easy enough job , however the union to abs unit are a different size & I had to use original unions. does any body know what size they are. ( for future reference incase I have to do them again ) food for thought , if I was to do the job again & with these particular pipes only the pipe that came out of the engine bay side were rotten. I wondered if I cut the pipes & put connecting unions on hence a shorter much easier to handle & not having to disturb the abs pump would be an advantage :-\