Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: laney101 on 15 December 2017, 02:33:15

Title: shock x4 replacement
Post by: laney101 on 15 December 2017, 02:33:15
omega currently on 132k mv6 facelift.

seen as std mv6 shocks are no longer available what the closest you can buy in terms of firmness and and overall package.

sachs  (original brand for omega i think) £280 for all four shocks
bilstein b4  (have used rears on other omegas and seemed quite good but are sachs better) £185
meyle (big german brand and known anyone used them) £173

what would be closest to standard mv6 shocks price not issue more how good shock is .. dont really want to go for something like a b6 bilstein or koni yellow as i think make it overly stiff
Title: Re: shock x4 replacement
Post by: tunnie on 15 December 2017, 13:43:55
B4's are about the closest to original MV6, it's all down to preference.  I would find these too firm myself and would probably go Sachs.
Title: Re: shock x4 replacement
Post by: Kevin Wood on 15 December 2017, 13:47:43
B4s were almost indistinguishable from my original MV6 shocks when I changed them, so you could infer from that that they are equivalent to worn MV6 shocks. I don't see how anyone could think they are too firm unless you like driving a water bed. ;)
Title: Re: shock x4 replacement
Post by: tunnie on 15 December 2017, 13:52:17
B4s were almost indistinguishable from my original MV6 shocks when I changed them, so you could infer from that that they are equivalent to worn MV6 shocks. I don't see how anyone could think they are too firm unless you like driving a water bed. ;)

Got fatty admin's old Elite shocks on front of my 3.2, think they had done 60/70k when fitted? So at 100k now and errrr 15 years old.  ;D

Rears are standard suspension GM shocks, 5 years old.

Just hope my water bed suspension setup does not spring a leak, as I find it rides spot on for my liking right now.  :)
Title: Re: shock x4 replacement
Post by: amba on 15 December 2017, 13:56:09
Fitted B,4s to the back of my 3.2 Elite and after less than 500 miles took them off and replaced them with Sachs.

Personal preference, but found the B4,s quite harsh....the Sachs have now been on for several 1000 miles and am pleased with them...B4,s still in original box back in the shed
Title: Re: shock x4 replacement
Post by: tunnie on 15 December 2017, 14:27:29
Fitted B,4s to the back of my 3.2 Elite and after less than 500 miles took them off and replaced them with Sachs.

Personal preference, but found the B4,s quite harsh....the Sachs have now been on for several 1000 miles and am pleased with them...B4,s still in original box back in the shed

That's good to know I'm not alone in my thoughts  :y
Title: Re: shock x4 replacement
Post by: Doctor Gollum on 15 December 2017, 15:20:25
Sachs going on mine as oe replacements :y
Title: Re: shock x4 replacement
Post by: TheBoy on 15 December 2017, 18:40:54
B4 are a straight replacement for a standard shock.  Anyone who claims they are firmer just hasn't realised how bad their old shocks were ;)

B6 if you want firmer, sportier shocks from the Bilstein range.


I have found that B4s do seem to be more durable than GM ones, but otherwise no different (comparing new for new).
Title: Re: shock x4 replacement
Post by: VXL V6 on 15 December 2017, 19:52:15
No complaints with B4's here, plus they can handle lowering springs.
Title: Re: shock x4 replacement
Post by: robson on 17 December 2017, 11:13:45
so what do you make of that? :y
Title: Re: shock x4 replacement
Post by: TheBoy on 17 December 2017, 11:32:26
I need to look at what to buy for the back of TBE, which looks to be sat low at the back again.  Admittedly, due to weather, the petrol tank is unusually full, but even so...

Currently B4, and have had a hard life, covering probably 80-100k on the Bullet, before swapping them over last year when TBE's Irmscher shocks gave up the ghost.

Probably need to check the springs as well, also off the Bullet, swapped at same time to replace the crap Irmscher ones. I don't think they would have snapped, as not that old IIRC...   ...but did come from euroshite, so who knows if they really are Sachs ;D
Title: Re: shock x4 replacement
Post by: Migv6 le Frog Fan on 17 December 2017, 12:29:36
I'm going to give this place a try if I change my shocks in the future.
http://www.europerformance.co.uk/pages/products/product_info.mhtml?product=262866;car=vauxhallomega

£80 a pair for B4,s rear. £113 a pair for B4,s front.
Title: Re: shock x4 replacement
Post by: tigers_gonads on 17 December 2017, 14:34:26
Replaced all my shocks for B4's about 3 years ago.If anything, I find the B4's a littler softer then OEM Mv6 shocks.

Then again, I always was a little weird  :P ;D
Title: Re: shock x4 replacement
Post by: ajsphead on 18 December 2017, 07:29:40
B4s on mine and the ride is totally acceptable. If they seem rather stiff compared to what you're used to then remember you're changing the old ones because they're knackered and we acclimatise to "normal" very easily over a long period of time. A harsh ride would be caused by cheap nasty lowering springs, B6 or above and 17" or bigger wheels. I've seen it and wondered why the owner didn't just buy an Audi if he wanted rubbish ride quality.
Title: Re: shock x4 replacement
Post by: biggriffin on 18 December 2017, 08:06:45
Cheap

https://m.ebay.co.uk/itm/2-NEW-REAR-GAS-SHOCK-ABSORBERS-VAUXHALL-OMEGA-A-B-1986-2003/162492452100?hash=item25d54e0d04:g:0k4AAOSw9~5ZThof  :y  :)
Title: Re: shock x4 replacement
Post by: laney101 on 23 December 2017, 02:09:21
on that basis may go brand new b4 full set :)

even tempted to have coil spring in Sheffield make a new set of mv6 springs up
Title: Re: shock x4 replacement
Post by: tigers_gonads on 27 December 2017, 13:04:11
on that basis may go brand new b4 full set :)

even tempted to have coil spring in Sheffield make a new set of mv6 springs up





IF you do, have a word about a front / rear / estate rear job lot prices  ;)
I think he may get a little bit of business off this forum  :y
Title: Re: shock x4 replacement
Post by: laney101 on 28 December 2017, 13:20:23
ive used him before for my sierra ... but that was a car he had on file

dont know if he has specs of mv6 on file so shall have a word and see what he says ..
Title: Re: shock x4 replacement
Post by: tigers_gonads on 31 December 2017, 13:19:36
ive used him before for my sierra ... but that was a car he had on file

dont know if he has specs of mv6 on file so shall have a word and see what he says ..


Cheers  :y