Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: dave the builder on 14 June 2018, 20:00:37
-
ordered a 2.6 coil pack bosch 0 221 503 027 (same as fitted to my v6)
got sent a 3.2 se coil pack bosch 0 221 503 473
checked that number and it is 2,4,6 pack but off vectra c /signum 3.2 z32se
looks the same
can't find a matching cross reference to say the 3.2 item succeeds the old part number
purchased it from The Boy's favorite on-line auction site ;D
send it back ? or will it be fine :-\
bearing in mind ,i have to dismantle half the car to swap it :D
-
It will be fine. Get it done :D
And next time, start from the front, not the boot ;D
-
It will be fine. Get it done :D
And next time, start from the front, not the boot ;D
so i don't need to drain the oil, remove the sump, main and big ends,pistons ,block ,heads to get to the coil packs then :-[
Thanks Doc :y your a star :)
-
so i don't need to drain the oil, remove the sump, main and big ends,pistons ,block ,heads to get to the coil packs then :-[
Personally, and this is just Me ....... I would switch the Engine off before replacing. ;)
-
so i don't need to drain the oil, remove the sump, main and big ends,pistons ,block ,heads to get to the coil packs then :-[
Personally, and this is just Me ....... I would switch the Engine off before replacing. ;)
I do switch the engine off before dumping the oil out the sump :y
and i'm not fast enough to crack the shells off the big ends with the engine @ 800 rpm ;D
-
;D ;D ;D
-
so i don't need to drain the oil, remove the sump, main and big ends,pistons ,block ,heads to get to the coil packs then :-[
Personally, and this is just Me ....... I would switch the Engine off before replacing. ;)
I do switch the engine off before dumping the oil out the sump :y
and i'm not fast enough to crack the shells off the big ends with the engine @ 800 rpm ;D
Your gonna need to work on that Dave, I can change a Cambelt at 2000rpm. :D
-
so i don't need to drain the oil, remove the sump, main and big ends,pistons ,block ,heads to get to the coil packs then :-[
Personally, and this is just Me ....... I would switch the Engine off before replacing. ;)
I do switch the engine off before dumping the oil out the sump :y
and i'm not fast enough to crack the shells off the big ends with the engine @ 800 rpm ;D
Your gonna need to work on that Dave, I can change a Cambelt at 2000rpm. :D
that's only 3 bolts with the covers removed , 2 bolts on the 4 banger engine :P :P
coil pack will have to wait (old one is doing the job) Brother is moving house today ::)