Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: danzigfan on 28 March 2019, 16:21:25
-
As above....just bounces back. I'm on my way to work by train now, car will spend the night unlocked on a parking lot :-[
Did it happen to anyone? Do parts from MFL fit to FL because I believe I still have door mechanism from previous omega somewhere in garage :-\
-
As above....just bounces back. I'm on my way to work by train now, car will spend the night unlocked on a parking lot :-[
Did it happen to anyone? Do parts from MFL fit to FL because I believe I still have door mechanism from previous omega somewhere in garage :-\
As far as the mechanical latch and locking motor concerned, they are the same across all Omega B :y
-
Thanks :y I just hope I find it tommorow
-
The black plastic doofer that catches on the pillar pin will be stuck down in the lock position. ;D
-
The black plastic doofer that catches on the pillar pin will be stuck down in the lock position. ;D
Yep, might even be as simple as operating the handle to free it, failing that, give it a prod as it may have stuck (worth taking the lock mech out and giving it a good clean and oiling if so.
-
No, it moves freely but doesn't lock. I tried it with a screwdriver
-
Unfortunately a common problem with a few lots of the door locks. Had the same problem driving on the highway which is actually no fun in corners. :o Don’t waste time on fixing the locking system, get a new / second hand one.
-
I had a sticking interior handle on a pre-facelift which stopped the door from staying closed.
Pushing the handle back allowed the door to latch.
-
Thanks for info guys, will check/replace tommorow after work :y
-
Came home and found out I only had front and rear driver's side locking mechanism...thought I had all four, but luckily I somehow had the one I needed :y All fine now with mechanism replaced, works as good as new. Thanks for help