Omega Owners Forum
		Chat Area => General Discussion Area => Topic started by: Auto Addict on 06 December 2019, 08:00:03
		
			
			- 
				Some toerag(s) have pinched my dustcaps >:(
			
- 
				Some toerag(s) have pinched my dustcaps >:(
 
 
 The metal caps? ..... They're normally stuck solid
- 
				My dustcaps with the logo kept getting nicked so I gave up in the end and just stuck with the black/grey plastic type. One set got nicked while we were away in the caravan and the car was alongside it. I'd always trusted my fellow campers/tourers until then.  >:(
 
 
 The metal caps? ..... They're normally stuck solid
 
 
 On my lads car we had to run a hacksaw across the top of the metal cap and split them off. If they're not touched for a while they don't half grip don't they.  :y
- 
				My dustcaps with the logo kept getting nicked so I gave up in the end and just stuck with the black/grey plastic type. One set got nicked while we were away in the caravan and the car was alongside it. I'd always trusted my fellow campers/tourers until then.  >:(
 
 
 The metal caps? ..... They're normally stuck solid
 
 
 On my lads car we had to run a hacksaw across the top of the metal cap and split them off. If they're not touched for a while they don't half grip don't they.  :y
 
 
 Plastic, learned my lesson in the past with metal. ;)
- 
				Yes......metal caps 'weld' themselves and are all but impossible to remove.......as I know to my cost. :-\
 
 I had to 'half inch' a set of plastic caps from a derv Mercedes whilst driving through Brum. :)
 
 Every cloud. :)
- 
				 ....
 
 I had to 'half inch' a set of plastic caps from a derv Mercedes whilst driving through Brum. :)
 
 Every cloud. :)
 
 ;D ;D
 
- 
				Just taken all the metal caps of SWMBOs Subaru & replaced with plastic, the metal ones were getting very difficult to unscrew.
			
- 
				Yes......metal caps 'weld' themselves and are all but impossible to remove.......as I know to my cost. :-\
 
 I had to 'half inch' a set of plastic caps from a derv Mercedes whilst driving through Brum. :)
 
 Every cloud. :)
 
 
 Not mine then, went missing in Stafford ;D
- 
				I grease my metal ones.
 
 Round these parts, the kids are too stupid to nick anything like that.
- 
				Yes......metal caps 'weld' themselves and are all but impossible to remove.......as I know to my cost. :-\
 
 I had to 'half inch' a set of plastic caps from a derv Mercedes whilst driving through Brum. :)
 
 Every cloud. :)
 
 
 Not mine then, went missing in Stafford ;D
 
 Surprised they didn't nick the whole car there. Thats getting near to Mad Stokie territory.