Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: stu24v on 24 March 2020, 17:20:31

Title: 0500 and 1700 fault codes mv6 3.2
Post by: stu24v on 24 March 2020, 17:20:31

Few weeks ago all gear lever lights on . Spanner light on also t c  light on car set off in limp mode turn ignition of back on car drove fine . Fault codes 1700 and 0500 now car won’t start not even turning over any ideas cheers.😰

Title: Re: 0500 and 1700 fault codes mv6 3.2
Post by: Doctor Gollum on 24 March 2020, 18:16:59

You could clean the selector switch ::)

There's a guide ;)

Title: Re: 0500 and 1700 fault codes mv6 3.2
Post by: VXL V6 on 24 March 2020, 18:49:53

Funny that, gave exactly the same advice on the identical post in the test zone!

Title: Re: 0500 and 1700 fault codes mv6 3.2
Post by: Doctor Gollum on 24 March 2020, 18:55:25

Quote from: VXL V6 on 24 March 2020, 18:49:53

Funny that, gave exactly the same advice on the identical post in the test zone!

Oh, the irony...  ;D

Title: Re: 0500 and 1700 fault codes mv6 3.2
Post by: stu24v on 24 March 2020, 19:44:42

Quote from: Doctor Gollum on 24 March 2020, 18:16:59

You could clean the selector switch ::)

There's a guide ;)

thanks that’s my next job checked gear oil all seems ok