Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: daveycooper on 13 April 2020, 20:20:58
-
Chaps.
I have a 1997 car. Inside the boot (On the bootlid) there is the rear side of the light clusters (ie where you would get access to change the rear bulbs. However there are no covers (ie you can see the bulb housings etc). See picture below. Is this normal or should there be plastic covers?
Cheers
Davey
(https://i.postimg.cc/tT0N2R1X/58-D9-B470-B632-4-F9-B-BDFA-830-E08-B9695-E.jpg) (https://postimg.cc/p9ZjdHY7)
-
Should be covers ;)
-
should have plastic covers over them yes :y
though they do fall off easy
-
Thanks both for confirming my suspicions! Off to ebay it is then! 😎
-
Thanks both for confirming my suspicions! Off to ebay it is then! 😎
Be mindful that post '99/00 may well be different ;)
-
Yes I did think that, I know what mine should look like. Can anyone post a picture of a later/facelift car? That would be very useful 😁
-
Yes I did think that, I know what mine should look like. Can anyone post a picture of a later/facelift car? That would be very useful 😁
Eh ? :-\ :-\ :-\ so you "already knew" it should have them ? ::) ::)
Or am I missing something here ? ;D ;D ;D
-
Yes I did think that, I know what mine should look like. Can anyone post a picture of a later/facelift car? That would be very useful 😁
Eh ? :-\ :-\ :-\ so you "already knew" it should have them ? ::) ::)
Or am I missing something here ? ;D ;D ;D
Two light covers by the look of it... ::)
-
Just wondering why OP was asking "should it have covers "
if he already knows what they look like . :o :o
Prehaps it's me . . .maybe this lockdown is causing bizarre behaviour and the ability for me to assess things in the normal manner ;D ;D ;D ;D ;D ;D
-
I should have explained! I have been in contact with a breaker who can supply me with one only but who has kindly sent me a photo. So I now know what the ‘mark 1/pre-facelift’ cover looks like. However, I dont know what the ‘facelift/mark two’ cover looks like and whether or not I could get away with buying a full, later set off another breaker.
Thus the reason for asking for a photo.......
Gee you are a suspicious lot But diligent!! Hahaha
-
I should have explained! I have been in contact with a breaker who can supply me with one only but who has kindly sent me a photo. So I now know what the ‘mark 1/pre-facelift’ cover looks like. However, I dont know what the ‘facelift/mark two’ cover looks like and whether or not I could get away with buying a full, later set off another breaker.
Thus the reason for asking for a photo.......
Gee you are a suspicious lot But diligent!! Hahaha
Never . . . .just trying to liven up a boring day stuck at home . . . you will soon get the jest of it on here . . . ;D ;D ;D ;D hope you find your covers :y :y :y
-
Check out the parts for sale section Annihalator is breaking a mini facelift car and may have the covers you're after. :y
-
Check out the parts for sale section Annihalator is breaking a mini facelift car and may have the covers you're after. :y
It's an Estate..
-
Check out the parts for sale section Annihalator is breaking a mini facelift car and may have the covers you're after. :y
It's an Estate..
That conversion would make an interesting isolation project... :D
-
And face-lift ones are different and don't fit.
-
And face-lift ones are different and don't fit.
Thanks for this!
And to all for the banter, especially in the current climate. Two young scamps here (one only 10months) so it’s an “interesting” time at the minute.
Still, all the cars have been cleaned and polished!
cheers
Davey