Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: steviet on 22 August 2020, 16:36:11

Title: ABS plug at ECU
Post by: steviet on 22 August 2020, 16:36:11

Hi there would anyone have a layout of the multi pin plug off the ABS ecu
Omega 2.6 v6 reg 2002

Title: Re: ABS plug at ECU
Post by: LC0112G on 23 August 2020, 00:04:24

There appears to be 3 different systems - Standard ABS, ABS + Electronic Stability Program and ABS + Traction control.

Standard ABS is unit K50 at lines 2720-2750 in the circuits.
ABS + ESP is unit K169 at lines 5100-5150 in the circuits.
ABS + TC is unit K95 at lines 4600-4650 in the circuits.

The diagrams give the pin numbers on the unit. Difficult to be more specific unless you know which of the 3 systems you're looking for. If you can work that out I can probably get you a diagram of the plug itself.

A zip of all the circuits here:
https://github.com/MalcolmRobb/OmegaBCircuits/raw/master/OmegaB2002.zip

Or if you want individual pages you can download them from here :
https://github.com/MalcolmRobb/OmegaBCircuits

Title: Re: ABS plug at ECU
Post by: Doctor Gollum on 23 August 2020, 07:23:49

ABS + TC ;)

Title: Re: ABS plug at ECU
Post by: steviet on 23 August 2020, 10:20:27

Thanks guys for the help

Title: Re: ABS plug at ECU
Post by: LC0112G on 23 August 2020, 13:46:28

Quote from: Doctor Gollum on 23 August 2020, 07:23:49

ABS + TC ;)

In which case, it might be this :

(https://i.ibb.co/D1fRjH7/ABS-TC.jpg) (https://ibb.co/D1fRjH7)

Located on the NSF chassis rail, behind the battery.

Title: Re: ABS plug at ECU
Post by: steviet on 25 August 2020, 14:56:55

Thanks Doctor Gollum exactly what I was looking for  :y