Omega Owners Forum

Newbie Area => Newbie Welcome Area => Topic started by: Jaspers on 29 November 2020, 07:33:45

Title: Hi
Post by: Jaspers on 29 November 2020, 07:33:45

Hi all, i'm new here.
Im jasper ,from holland and i drive a c kadett and building a x20xev engine for it .
Now i need some help with the wirering i have a simtec 56.2 ecu i need the pin conector points and i need to know what the round conectors pins are .
Can annybody help me whit this ?
Thanks jasper

Title: Re: Hi
Post by: Doctor Gollum on 29 November 2020, 12:07:06

The wiring diagrams in Haynes manual will cover this :y

Title: Re: Hi
Post by: luizvivas on 30 November 2020, 14:18:39

Welcome and good luck in your project!!  :y

Title: Re: Hi
Post by: Jaspers on 30 November 2020, 20:54:12

Thanks :) :)

Title: Re: Hi
Post by: Mr Skrunts on 01 December 2020, 22:49:52

Hi, welcome to the forum. :y

Title: Re: Hi
Post by: migiestate on 02 December 2020, 14:08:52

Hello and welcome Jasper  :y.

Title: Re: Hi
Post by: JerrOMe on 14 December 2020, 04:08:55

That sounds like an interesting project for you!

Title: Re: Hi
Post by: Rangie on 14 December 2020, 06:52:41

Hi & good luck with your project.

Title: Re: Hi
Post by: Shackeng on 14 December 2020, 07:37:46

Welcome to OOF Jasper. That will give some power increase, and weight?

Title: Re: Hi
Post by: migiestate on 14 December 2020, 21:21:39

Hello and welcome to the forum Jasper :y .Plenty of great help to be had here with your project  :y :y.