Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mong00sehun on 14 March 2026, 18:04:37

Title: Sport seat switch
Post by: mong00sehun on 14 March 2026, 18:04:37

Hi guys, i finally get my seats back from the upholsterer:

(https://i.ibb.co/1fmWmk9K/62728e1b-978f-44c8-bab9-44bae4bd4df0-1.jpg)

but i have some issue with the switch. its broken, i cant press it. so i tried to remove it from the seat cover, but i break it yay:

(https://i.ibb.co/ZRPskp13/536d4371-adf1-4b9a-978c-06edb1bbcd2b.jpg)

the wires are: RED - BROWN - GREY/BROWN - GREY
which ones should i short to move the seats up and down? the RED one have 12v thats what i know. i tried to short some random one, but i popped a fuse, oops

Title: Re: Sport seat switch
Post by: polilara on 15 March 2026, 12:38:05

Nice seats, this is what I have under my 2001 Omega 2.6
(https://i.postimg.cc/PxR1qkY6/20260315-142835.jpg)
(https://i.postimg.cc/nL5vFJvk/20260315-142621.jpg)

Title: Re: Sport seat switch
Post by: mong00sehun on 15 March 2026, 16:30:07

thanks
if i think good, red is +12v brown is ground. the other two wires is going to the dc motor, so i just need to short the red to the gray and brown to the grey/brown, and the seat will go up or down

Title: Re: Sport seat switch
Post by: polilara on 15 March 2026, 18:32:15

I was thinking that way, too. Be careful.

Title: Re: Sport seat switch
Post by: mong00sehun on 23 March 2026, 18:28:56

i did the soldering its working. not my best work...
i bought a 6 pin (on)-off-(on) switch. it has 3 position, first is the netural, then i can press for both end separately.

1      2

3      4

5      6

that's are the terminals
i soldered +12v to pin 1, GND to pin 2
seat motor gray to pin 3, seat motor gray-brown to pin 4
then i shorted pin 1 to pin 6, and pin 2 to pin 5, this is for the another way