Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Del Boy on 15 October 2008, 21:13:43
-
As title asks, gonna give it a go done it on a few cars before, how easy is it on the mig? Never done it in 5 years :-[
-
Guide here
http://www.omegaowners.com/forum/YaBB.pl?num=1152598350
-
Guide here
http://www.omegaowners.com/forum/YaBB.pl?num=1152598350
Cheers mate :y
-
As title asks, gonna give it a go done it on a few cars before, how easy is it on the mig? Never done it in 5 years :-[
Much easier than changing the camcover gaskets... ;D
-
Seriously, the disassembly is quite simple, but actually getting the muck out of the buggers is something else. >:(
Ayt one point of time I was considering simply buying new bits from Vx so i don't have to clean them, but I didn't (I am stingy, you see). So I spent 2 hours with a pipe cleaner instead :P
-
Seriously, the disassembly is quite simple, but actually getting the muck out of the buggers is something else. >:(
Ayt one point of time I was considering simply buying new bits from Vx so i don't have to clean them, but I didn't (I am stingy, you see). So I spent 2 hours with a pipe cleaner instead :P
I'd rather spend hours cleaning stuff tbh ;D As once said by Del Trotter, I'm an arthodox tight ar*e. :)
-
Seriously, the disassembly is quite simple, but actually getting the muck out of the buggers is something else. >:(
Ayt one point of time I was considering simply buying new bits from Vx so i don't have to clean them, but I didn't (I am stingy, you see). So I spent 2 hours with a pipe cleaner instead :P
I'd rather spend hours cleaning stuff tbh ;D As once said by Del Trotter, I'm an arthodox tight ar*e. :)
..so are you swapping the 'meega for a Robin? :P
-
Just to give you an idea what it looks like....:
(http://img171.imageshack.us/img171/7251/image043ba5.jpg)
-
Seriously, the disassembly is quite simple, but actually getting the muck out of the buggers is something else. >:(
Ayt one point of time I was considering simply buying new bits from Vx so i don't have to clean them, but I didn't (I am stingy, you see). So I spent 2 hours with a pipe cleaner instead :P
I'd rather spend hours cleaning stuff tbh ;D As once said by Del Trotter, I'm an arthodox tight ar*e. :)
..so are you swapping the 'meega for a Robin? :P
Walked into that one ;D
Yeah should be easy enough :-/
-
I bought two aerosol cans of Halfords Carb cleaner LSG and simply blasted the muck out with those leaving all components soaking in between 'blasts' for a while. ;)
It appears to have worked so far, and the muck that came out!!! :y