Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: JamesV6CDX on 19 November 2008, 15:01:52
-
This is not my area of expertise, so asking for advice here.
When refurbing a wheel, do you do it with the tyre fitted, or tyre removed?
I guess with tyre off it's easier access, but I didn't want to get any paint on the inner rim, and the (old) tyre is probably a better mask than any tape ::)
Tyres will all be replaced once wheels finished...
-
tyre off to do a wheel refurb
if its just to paint it (i wouldnt) then you can mask off the tyre
doug
-
This is not my area of expertise, so asking for advice here.
When refurbing a wheel, do you do it with the tyre fitted, or tyre removed?
I guess with tyre off it's easier access, but I didn't want to get any paint on the inner rim, and the (old) tyre is probably a better mask than any tape ::)
Tyres will all be replaced once wheels finished...
normally this must be done wheels off.. Because before the paint step
a final check and correction is required mostly..and this cant be done
with a wheel on it..The last time I paint the original miggy wheels
there was a fracture which was not visible with wheels on :o
but if you trust your wheels condition then no problem :y