Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Jimbob on 09 February 2009, 08:55:26
-
Who put those solid brake pipes over the lower caliper bolt >:(
Meant we had to clamp em, and remove the pipe to get the calipers off to do Rear disks and pads.
Lovely job this time of year!
-
Who put those solid brake pipes over the lower caliper bolt >:(
Meant we had to clamp em, and remove the pipe to get the calipers off to do Rear disks and pads.
Lovely job this time of year!
Just bend them slightly
-
Who put those solid brake pipes over the lower caliper bolt >:(
Meant we had to clamp em, and remove the pipe to get the calipers off to do Rear disks and pads.
Lovely job this time of year!
Just bend them slightly
Wouldnt have said there was enough safe bending room to get a socket on :-?
-
I always use a ring spanner.....but they can be bent enough to get a socket in.
-
ahh well, hopefully not be doing them again anyway ;D
-
Who put those solid brake pipes over the lower caliper bolt >:(
Meant we had to clamp em, and remove the pipe to get the calipers off to do Rear disks and pads.
Lovely job this time of year!
Just bend them slightly
Wouldnt have said there was enough safe bending room to get a socket on :-?
Stacks of room... Just be gentle :y :y
-
Father in law wasnt taking any chances breaking em (was bloody cold as well), so clamp and remove it was.