Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Markjay on 16 January 2007, 23:57:27
-
Found this on the net, it looks like Carlton (Omega-A):
(http://img153.imageshack.us/img153/9383/p1je0.jpg) (http://imageshack.us)
(http://img201.imageshack.us/img201/9392/p2ko9.jpg) (http://imageshack.us)
-
looks like the same connector as my Senator, in the same place too.
Might have a bash with that at the weekend, cheers :y
-
Same as a Cavalier as well, used it a few times, didnt know about the A-H link though
-
Yup,
Bridging out those pins and switching the ignition on will give you the same info as if you were getting the blink codes off an earlier Omega or even using a tech1.
-
Only problem is....isn't the diagnostic plug under the bonnet? So would need 2 of you to check?
-
ever repeating codes, so bridge, then into the car and wait for 12
-
Yep, Bosch Motronic 1.5 so pretty much the same codes as the Omega.
Hall effect sensor is a favourite to play up on Senators.