Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: PaulW on 21 March 2009, 16:32:21

Title: Had the Elite on the rollers today...
Post by: PaulW on 21 March 2009, 16:32:21

Tagged along to a dyno day today, and gave the Omega its first every powerrun during my ownership (and also will be a good comparison for the 3.2 when its in)  Anyways, here are the graphs...

Power at Fly / Torque
(http://i130.photobucket.com/albums/p266/PaulW21781/My%20Cars/Omega%20Elite/3e848e3a.jpg)

Power at Wheels / AF Ratio
(http://i130.photobucket.com/albums/p266/PaulW21781/My%20Cars/Omega%20Elite/a92f938d.jpg)

Not bad :)

Title: Re: Had the Elite on the rollers today...
Post by: HerefordElite on 21 March 2009, 18:19:18

nice result if that was your 2.5? :y

Title: Re: Had the Elite on the rollers today...
Post by: PaulW on 21 March 2009, 18:49:24

Aye was the current 2.5, not bad either I thought :)

Title: Re: Had the Elite on the rollers today...
Post by: Elite Pete on 21 March 2009, 19:32:20

Brilliant considering the mileage its done ;)

Title: Re: Had the Elite on the rollers today...
Post by: PaulW on 21 March 2009, 22:46:12

Quote

Brilliant considering the mileage its done ;)

183k miles :) the 3.2 should prove interesting I reckon  ;D

Title: Re: Had the Elite on the rollers today...
Post by: Tony H on 22 March 2009, 09:14:59

Not lost any horses then, in fact gained a few  :)

Title: Re: Had the Elite on the rollers today...
Post by: PaulW on 23 March 2009, 20:06:40

Aye Tony, I was surprised to be honest, I put down I was only expecting 12bhp, that way I had a good chance of not being dissapointed  ;D

Managed to get a video up, not the best mind...

[media]http://www.youtube.com/watch?v=YPD_SiFD2U0[/media]

Title: Re: Had the Elite on the rollers today...
Post by: Chris_H on 23 March 2009, 20:34:08

Presumably it was measured at the back wheels and estimated back to the flywheel or tc?

Title: Re: Had the Elite on the rollers today...
Post by: sidewaysmv6 on 23 March 2009, 22:18:18

nice lookin motor that,well respectable figures too,well done lad! :y