Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: TheBoy on 26 February 2007, 14:25:24
-
OK, trying to get tools back to their rightful owners. MaxV6 now has his BBQ stuff and rad.
I have:
Loctite cap - MDTM
Halfords E12 - ?
Rubber mallet - ?
Tweezers - ?
Missing:
Halfords E10
Halfords E11
Halfords rachet spanner 12/13mm
MDTM has:
Halfords E10 - TB
Missing:
Draper Pro E12
Various Stanley screwdrivers
2.2 camlock - Tunnie
Can those who had work done just double check under bonnet, esp the sides, for missing sockets and small screwdrivers ;)
-
Well I have an E10....so I guess thats yours.....tweezers are mine...
Extras:
The Boy
Loctite cap - MDTM
Halfords E12 - ?
Rubber mallet - ?
Tweezers - MDTM
MDTM
Halfords E10 - TB
Missing:
The Boy
Halfords E10 - MDTM has...
Halfords E11
Halfords rachet spanner 12/13mm
MDTM
Draper Pro E12
Various Stanley screwdrivers
2.2 camlock - Tunnie
-
....tweezers are mine...
Sorry about that :-[ well it was dark!
-
shall i post you the 2.2 camlock?
-
Ive had a look and ive not got anything, sorry
-
shall i post you the 2.2 camlock?
I've got a couple of bits to post, so may as well post together if your mum wants to pop through letterbox...
-
shall i post you the 2.2 camlock?
I've got a couple of bits to post, so may as well post together if your mum wants to pop through letterbox...
Will she fit...I know Tunnie will....but his mum..?
-
shall i post you the 2.2 camlock?
I've got a couple of bits to post, so may as well post together if your mum wants to pop through letterbox...
Will she fit...I know Tunnie will....but his mum..?
;D ;D ;D
-
Laidback66 has confirmed that his tool kit is all present and correct......
Did anybody else have a Halfords kit there.....sounds2K?
-
as an aide de memoire, I can say I first saw that Rubber Mallet I dropped off, wielded in the hands of Dave LB66, as he was carrying it in from the front of the driveway towards my car... it were proper scary, :y big chap, with big hammer, approaching one's car with an air of grim determination ;)
hope it helps jog a memory...
Max
-
as an aide de memoire, I can say I first saw that Rubber Mallet I dropped off, wielded in the hands of Dave LB66, as he was carrying it in front of the driveway towards my car... scary, big chap, with big hammer, approaching one's car with an air of grim determination ;)
Going 'Ugg Ugg' and scratching his arm pit.....yes I remember the guy... ;)
-
well it appears that my set is complete ... but the E11 does look older than the rest so I guess that must be TheBoy's, mine is probably either in BoBo's engine bay or the road where the cam cover change was done? ::)
Haven't been able to check the big white box of stuff as it's in the garage and that's 4 miles from here ... will try to pop over there soon to check ... probably tomorrow ...
-
as an aide de memoire, I can say I first saw that Rubber Mallet I dropped off, wielded in the hands of Dave LB66, as he was carrying it in front of the driveway towards my car... scary, big chap, with big hammer, approaching one's car with an air of grim determination ;)
Going 'Ugg Ugg' and scratching his arm pit.....yes I remember the guy... ;)
And you will be capable of little more when I bounce aforementioned mallet off your head when I get it back! >:(
;)
That will be Mr McB's mallet Jaime, I'll get it back sometime.
-
righto ... I popped to the garage and grabbed the box of stuff I brought back.
No more sockets in there, but I do appear to be missing my dead blow hammer - like a rubber mallet, but with lead shot inside (sounds like a maracca)
TheBoy ... will post your E11 to you tomorrow.
BoBo & EP - please can you check for a halfords E11 torx bit (still fairly shiny) in your engine bays, I seem to remember some of my tools being used on EP's cambelt change before I started BoBo's cam covers ... thanks :y
EDIT: just popped down to the sorting office (just) in time for last post, so that E11 socket should be arriving at TheBoy's tomorrow :)
-
Extras:
The Boy
Loctite cap - MDTM
Halfords E12 - ?
Rubber mallet - ?
Tweezers - MDTM
MDTM
Halfords E10 - TB
Sounds2k
Halfords E11 - TB
Missing:
The Boy
Halfords E10 - MDTM has...
Halfords E11 - Sounds has
Halfords rachet spanner 12/13mm
MDTM
Draper Pro E12
Various Stanley screwdrivers
2.2 camlock - Tunnie
Sounds2k
E11
Hammer
-
I seem to have acquired the maraca.... :-? but I didn't put it my car...
-
I seem to have acquired the maraca.... :-? but I didn't put it my car...
well - as the crate was near Max's estate and you were wielding the hammers, I guess whoever it was assumed that it was yours ;)
I'll grab it sometime, at least now I know where it is ... will get another in the mean time ...
-
... I also appear to be missing from the clear box a new (still had the hanging tag on it!!) halfords 16" breaker bar ... ????
-
... I also appear to be missing from the clear box a new (still had the hanging tag on it!!) halfords 16" breaker bar ... ????
Christ.....I hope thats not sat in an engine bay somewhere....
Is the ratchet spanner still on MaxV6's handbrake....?
-
... I also appear to be missing from the clear box a new (still had the hanging tag on it!!) halfords 16" breaker bar ... ????
Christ.....I hope thats not sat in an engine bay somewhere....
Is the ratchet spanner still on MaxV6's handbrake....?
Ohhh b*gger! I think I left the ratchet on the handbrake adjuster! :o :-[
Still, it'll be fine there, the heat shields will keep it there.... until it comes off, and then ratlles like hell on top of them! ;D
-
if practicable, I'm sure james would retrieve it for you this weekend.....
:D
-
mind you , there were, as i recall, a couple of slightly worrying clanky sounding bumps on the way home saturday night.,...
-
Max, PM me your address. I want to come down and fit a cable for you.
I want to finish this job, I won't be happy until I do!
-
Max, PM me your address. I want to come down and fit a cable for you.
I want to finish this job, I won't be happy until I do!
And retrieve my spanner ;D
-
Max, PM me your address. I want to come down and fit a cable for you.
I want to finish this job, I won't be happy until I do!
Mate it's a helluva way to go just for personal satisfaction.... not that i'm knocking it mind... if pushed, i'd have to admit i've done similarly mad things in the past, in the name of personal satisfaction, largely much to the wife's disgust ::)
your sennheisers are due to arrive here tomorrow night BTW. ( JW jumped the queue for us :y )
James is coming over this weekend, Saturday early afternoon onwards. Leak hunting..... almost as much fun as haggis hunting i'm told... ;)
I'm busting a gut trying to clear stuff out of the garage into the shed to make enough room for him to work in , but trying to do so in an orderly and planned manner, so it doesn't have to be done again....
Max
-
I'll be there... I HATE not completing a job! :-[
James can sort the coolant leak though... ;)
-
popped down the garage again tonight whilst there was still a bit of daylight left, found my 16" breaker bar in the box with the old wishbones, woo hoo :)
dunno why I couldn't see it in there the other night with a torch though :-[
-
I'll be there... I HATE not completing a job! :-[
James can sort the coolant leak though... ;)
LB, are you going down to MaxV6's place soon - if so, I can drop off the tools to go back 'up north' then you can get to MDTM and RMcB if thats OK?
-
... I also appear to be missing from the clear box a new (still had the hanging tag on it!!) halfords 16" breaker bar ... ????
Christ.....I hope thats not sat in an engine bay somewhere....
Is the ratchet spanner still on MaxV6's handbrake....?
Ohhh b*gger! I think I left the ratchet on the handbrake adjuster! :o :-[
Still, it'll be fine there, the heat shields will keep it there.... until it comes off, and then ratlles like hell on top of them! ;D
ROTFLMAO! ;D ;D ;D
Sorry :-[
;D ;D
-
Did Max's coolant leak get sorted in the end?
-
Did Max's coolant leak get sorted in the end?
Nope, not yet. I believe JamesV6CDX is going to have a look soon...
-
So, can I have the spare E12 then.......
-
So, can I have the spare E12 then.......
IIRC, didn't you have my E10? I am missing E10, E20, and 12/13 rachet
-
Yes, I do....will pop it in the post.....
-
LB66 is due here tomorrow morning fairly early Jaime.... (yes, there WILL be bacon butties and tea enough to go round... )
If it's a bit short notice to drop stuff off, I suspect you could sort out transport for tools on his way back?? (it seems like sensible route... )
Theo, James is due here tomorrow afternoon to have another go at this leak.....
we've just completed emptying the accessible end of the garage so it'll all be nicely under cover.
Max
-
LB66 is due here tomorrow morning fairly early Jaime.... (yes, there WILL be bacon butties and tea enough to go round... )
If it's a bit short notice to drop stuff off, I suspect you could sort out transport for tools on his way back?? (it seems like sensible route... )
Theo, James is due here tomorrow afternoon to have another go at this leak.....
we've just completed emptying the accessible end of the garage so it'll all be nicely under cover.
Max
Max, I'd come help out but weekends and evenings are difficult for me. Best of luck!
-
Yes, I do....will pop it in the post.....
Keep hold of it, I will pick up off you at some point....
-
Jaime. I can swing by your place on the way down/back. What is better for you?
-
Jaime. I can swing by your place on the way down/back. What is better for you?
Not sure what my plans are for tomorrow.
MaxV6 - can you PM me addr, I may be able to pop over? I need to be in Grove later on though...
LB66 - can you PM me your new mobile number (or is it same number as I have)?