Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: Marks DTM Calib on 14 August 2006, 13:06:42

Title: Another FAQ thread added
Post by: Marks DTM Calib on 14 August 2006, 13:06:42
On Lambda sensors....please post comments etc here

Ta
Title: Re: Another FAQ thread added
Post by: RonaldMcBurger on 14 August 2006, 13:32:47
FAQ off! ;D
Title: Re: Another FAQ thread added
Post by: Markie on 14 August 2006, 14:28:43
Keep em coming Mark - just had a read and as ever; excellent piece of work  ;)
Title: Re: Another FAQ thread added
Post by: mr des on 14 August 2006, 17:13:30
excellent write up Mark fool proof. on a slightly unrelated topic is it ok to clean the MAF sensor with electrical contact cleaner or will this be followed by a walk down to the motor factors for a shiney new one? just given the amount of oil on the air filter before i re routed  the breather pipe work i cant help thinking it must be covered in a nice haze of magnatec
Title: Re: Another FAQ thread added
Post by: Marks DTM Calib on 14 August 2006, 17:15:33
I find that foam keyboard cleaner works best......any heavy solvent risks damaging the sensor section.
Title: Re: Another FAQ thread added
Post by: mr des on 14 August 2006, 17:18:11
thank you sir for the speedy nature of you reply, and for the valuable information contained within. [smiley=dankk2.gif]

now where do they keep the cleaning products round here .........
Title: Re: Another FAQ thread added
Post by: Salty on 14 August 2006, 21:12:04
The sensor threads are really useful info Mark, can't wait to see whats next ;)
Title: Re: Another FAQ thread added
Post by: x25xe on 14 August 2006, 23:11:55
As others have said before me - another excellent write up.  Look forward to the next!