Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: TheBoy on 25 March 2007, 18:09:59

Title: Cam cover gaskets - done
Post by: TheBoy on 25 March 2007, 18:09:59

Right, finished at last :)

Took me more that "2hrs to do both sides" Mr DTM!  And I only did one side, albeit the passenger one.

Seems to have stopped leaking :). Changed the plugs, and gave the throttle body up whilst I was at it. Have to try another 0 - 60 now ;).

Flushed with success, though I would change the PAS belt on the Rover, but failed, as the effing idiots sold me the wrong belt  >:( - going by the part numbers, I reckon new one is 5mm shorter.

Title: Re: Cam cover gaskets - done
Post by: STMO123 on 25 March 2007, 18:15:56

Good job Jaime :y

Title: Re: Cam cover gaskets - done
Post by: Admin on 25 March 2007, 18:19:34

Don't you just love Marks estimates of time to do a job!  ;D

He forgets we are mortal and NOT engineers....  ;)

Title: Re: Cam cover gaskets - done
Post by: TheBoy on 25 March 2007, 18:22:38

And, I forgot, but I should thank Marks_DTM for advice - I had to give him yet another 'emergency call' part way through. :y

Title: Re: Cam cover gaskets - done
Post by: Markjay on 25 March 2007, 18:43:01

Quote

...Took me more that "2hrs to do both sides" Mr DTM!  And I only did one side, albeit the passenger one....

I'm doing it in a couple of weeks time...  :(

Good job TB  :y

Title: Re: Cam cover gaskets - done
Post by: Taxi_Driver on 25 March 2007, 18:44:34

Top job  :y

Title: Re: Cam cover gaskets - done
Post by: tunnie on 25 March 2007, 19:16:38

good to hear its fixed  :)