Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: JamesV6CDX on 06 April 2007, 17:40:10
-
This is a long shot, but I'm going to be held up over easter weekend due to the lack of a thermostat seal, and the 2 o rings for the front coolant transfer pipe
Does anyone have these components, that I could use and then replace?
-
I'm afraid AFAIK i only have the ones you put on the car mate, although i had a feeling there were 2 spare o rings... but I don;t have them if there were... I just looked ..
however I'd be happy to see if any of our local dealers have them and are open tomorrow morning.
Max
-
Most dealers are open tomorrow morning...
-
I'm afraid AFAIK i only have the ones you put on the car mate, although i had a feeling there were 2 spare o rings... but I don;t have them if there were... I just looked ..
however I'd be happy to see if any of our local dealers have them and are open tomorrow morning.
Max
you're a star... if you'd be so good as to make a call, I'd be eternally grateful :)
-
I have the two for the transfer pipe......but not for the stat to block seal although the grey sealent for the oil cooler works well here in conjunction with the old seal....
-
I have all of them ... 2 x P/N 9129999 (transfer pipe seals) and 1 x P/N 9128363 (stat to block) ... but I'm in Kent :-/
part numbers should help tho :y
-
I have all of them ... 2 x P/N 9129999 (transfer pipe seals) and 1 x P/N 9128363 (stat to block) ... but I'm in Kent :-/
part numbers should help tho :y
Indeed, I'll call the dealers first thing, I tried this afternoon, but they was all skiving off...... :(
Max
-
bellingers of grove/wantage have them in stock. I'm off to get them now.
Max
-
Beware the stat to block O ring....they generally only supply the later item and if used with a standard stat housing....it breaks the housing!
-
I Have them James.... (based on part numbers supplied above) I can bring them over tonight, I have to drop my daughter off at her grans (near Chipping Norton) at 5 pm or I'd head over now....
no Sat Nav as i'm in the 106 this weekend , the Meega is at the garage having all it's bits done for MOT and a full service (only thing they're not doing is the leak... )
So I'll need clear directions....
Max
-
Hi max,
You're a star
I'm actually not home until the morning now - I guess I'll have to pop up and get them from you?
-
Beware the stat to block O ring....they generally only supply the later item and if used with a standard stat housing....it breaks the housing!
Do you know what the part numbers are for old and new? Is the part number that max got (as above) for the older type O ring?
-
whatever's best for you James... I'm easy... quite happy to drop them over, or for you to pick them up... the only real difference being that you already know how to find our place.
.
Max
-
EPC shows the old stat to block P/N as 90410900 - superseded by P/N 9128363 ...
-
And the later seal is almost guaranteed to break the stat............been there, done that....bought the T-shirt.
-
Ahhh.... and is the earlier one still available chaps??
perhaps that's contributory to there beinga remaining small leak and coolant weirdness on mine??? (I do hope not.... but .... )
sorry James, it seems I have the later "piss useless piece of crap that breaks things" and your transfer pipe o rings...
Still at £1.82 for the lot, it's not a major disaster, but it does screw you up for finishing the job by monday night....
Max
-
.... so you might be needing one of these (http://cgi.ebay.co.uk/Vauxhall-Thermostat-Assy-Calibra-Cavalier-Vectra-Omega_W0QQitemZ200097035524QQcategoryZ10404QQrdZ1QQssPageNameZWD1VQQcmdZViewItem) as well when it does :'(
-
Ahhh.... and is the earlier one still available chaps??
perhaps that's contributory to there beinga remaining small leak and coolant weirdness on mine??? (I do hope not.... but .... )
sorry James, it seems I have the later "piss useless piece of crap that breaks things" and your transfer pipe o rings...
Still at £1.82 for the lot, it's not a major disaster, but it does screw you up for finishing the job by monday night....
Max
Ahh well... sh*te happens.... I do appreciate your efforts Max......
As Mark says, maybe some sealant around the old stat will be OK
In terms of your Stat housing... I am prepared to bet my right leg on the fact that it's not leaking after the treatment I gave it ;) ..
-
take some freindly advice form an older chap.
bet the left leg... you don't need it in an Elitie auto. !
-
take some freindly advice form an older chap.
bet the left leg... you don't need it in an Elitie auto. !
;D ;D ;D ;D
-
Max, I'm going to "improvise" on the stat seal, but I could still do with the transfer pipe rings..
Any chance of me popping up tonight, after dark? (so I can tinker with the other bits in daylight)..
Cheers :)
James
-
Sorry, change of plan.
Girlfriend doesn't want me to go
I'll have to sort something out another time :(
-
what ever's easiest mate.... politically and practically..... ;)
where are you at present, Cheltenham?? if so, i don;t mind popping them over tonight.