Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: tunnie on 07 April 2010, 09:59:43
-
Spotted it on offer last time i was there, worth a go?
http://www.screwfix.com/search.do;jsessionid=ZKZONUBVMLR20CSTHZOSFFQ?_dyncharset=UTF-8&fh_search=96659&searchbutton.x=0&searchbutton.y=0&searchbutton=submit
-
Spotted it on offer last time i was there, worth a go?
http://www.screwfix.com/search.do;jsessionid=ZKZONUBVMLR20CSTHZOSFFQ?_dyncharset=UTF-8&fh_search=96659&searchbutton.x=0&searchbutton.y=0&searchbutton=submit
Is this a hint to TB about breaking all your drill bits. ::)
-
Spotted it on offer last time i was there, worth a go?
http://www.screwfix.com/search.do;jsessionid=ZKZONUBVMLR20CSTHZOSFFQ?_dyncharset=UTF-8&fh_search=96659&searchbutton.x=0&searchbutton.y=0&searchbutton=submit
Is this a hint to TB about breaking all your drill bits. ::)
He was suggesting i get the set which comes with about 10 of each drill bit ;D
-
Spotted it on offer last time i was there, worth a go?
http://www.screwfix.com/search.do;jsessionid=ZKZONUBVMLR20CSTHZOSFFQ?_dyncharset=UTF-8&fh_search=96659&searchbutton.x=0&searchbutton.y=0&searchbutton=submit
Is this a hint to TB about breaking all your drill bits. ::)
He was suggesting i get the set which comes with about 10 of each drill bit ;D
PMSL, typical, has he got some more jobs lined up on the Migs..... ::)
-
Spotted it on offer last time i was there, worth a go?
http://www.screwfix.com/search.do;jsessionid=ZKZONUBVMLR20CSTHZOSFFQ?_dyncharset=UTF-8&fh_search=96659&searchbutton.x=0&searchbutton.y=0&searchbutton=submit
Is this a hint to TB about breaking all your drill bits. ::)
He was suggesting i get the set which comes with about 10 of each drill bit ;D
This is what you want. http://www.machinemart.co.uk/shop/product/details/cht565-170pce-titanium-coated-hss-dril
Expensive but a couple LPG conversions later and countless other jobs and they're still going strong, apart from a couple of breakages. ::)
Kevin
-
Spotted it on offer last time i was there, worth a go?
http://www.screwfix.com/search.do;jsessionid=ZKZONUBVMLR20CSTHZOSFFQ?_dyncharset=UTF-8&fh_search=96659&searchbutton.x=0&searchbutton.y=0&searchbutton=submit
Is this a hint to TB about breaking all your drill bits. ::)
He was suggesting i get the set which comes with about 10 of each drill bit ;D
This is what you want. http://www.machinemart.co.uk/shop/product/details/cht565-170pce-titanium-coated-hss-dril
Expensive but a couple LPG conversions later and countless other jobs and they're still going strong, apart from a couple of breakages. ::)
Kevin
Thats the one :)
-
27.6p per bit and a free case chucked.
TB will never treat you to that after breaking all your other bits. ::)
-
actually just thinking,way back in the days of doing my apprenticeship and all the tools I bought.
I have a tin box set of .5mm to 6mm and 6.1 to 10mm. Then 1/64 or 1/32 up to 1/2" and not a drill bit missing, allways replaced them if the broke.
For drilling bigger tham 6mm I allways used to use a lathe centre drill to start the hole off and my centre pop's aprt from the standard and auto ones were actually diesel injector needles. I got a few from various different injecters to practice reconditioning them and tried to blunt them to re do them and found they didnt really blunt. Still in my tool box to this day.
-
I have this kit as it came free with my drill when I bought it.
I would rate the drill bits as middle of the road.....certainly much better than the cheap standard stuff, but certainly the HSS bits are not upto the Dewalt quality which I have now settled on.
And Kevin, I also have a set of those Machine Mart bits and I rate them on a par with the Makita ones Tunnie is listing.
My recommendation would be, go for the Makita set and when you break a drill, replace it with dewalt (or equivalent) ones :y
-
I have this kit as it came free with my drill when I bought it.
I would rate the drill bits as middel of the road.....certainly much better than the cheap standard stuff but, certainly the HSS bits are not upto the Dewalt quality which I have now settled on.
And Kevin, I also have a set of those Machine Mart bits and I rate them on a par with the Makita ones Tunnie is listing.
My recommendation would be, go for the Makita set and when you break a drill, repalce it with dewalt (or equivalent) ones :y
Cheers :y
-
cut out the middle man so to speak and get
http://www.screwfix.com/prods/56065/Drill-Bits/Combination-Sets/DeWalt-Worksite-Set-90-Pc#
-
I like Kevin Wood's set, just purely down to numbers. Seem to be OK, certainly better than the tosh&decker ones from the chain hardware/gardening places, and million times better than the cheapo clarke ones I was using on my exhaust ;D
-
i bought a set of these last year as i get through a lot. best drills ive had but people borrow on site and they never get returned. i get bosch ones now which are just as good and a lot cheaper.
http://www.screwfix.com/prods/95497/Drill-Bits/Drill-Bit-Sets/HSS-Sets/Erbauer-HSS-Cobalt-Drill-Bit-Set-15Pcs#
-
cut out the middle man so to speak and get
....
I do. Straight from the stores! FOC too ;) ;D ;D ;D