Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: RonaldMcBurger on 19 August 2006, 17:06:56

Title: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 19 August 2006, 17:06:56
1999 3.0 MV6 Manual in silver. Everything works, but I am breaking it. Everything available except headlamp washers which are already missing! Doors are rusty at the tops, but everything else is good.

(http://i40.photobucket.com/albums/e219/ronaldmcburger/th_fd_1.jpg) (http://i40.photobucket.com/albums/e219/ronaldmcburger/fd_1.jpg)

(http://i40.photobucket.com/albums/e219/ronaldmcburger/th_9e_1.jpg) (http://i40.photobucket.com/albums/e219/ronaldmcburger/9e_1.jpg)

(http://i40.photobucket.com/albums/e219/ronaldmcburger/th_0a_1.jpg) (http://i40.photobucket.com/albums/e219/ronaldmcburger/0a_1.jpg)


Has Xenons, CCRT700 radio/Cd changer/phone system, MV6 cloth seats, manual gearbox, 17" MV6 Alloys which need a refurb or good clean-up, one brand spanking new tyre, Climate panel, all electric windows, tilting steering, good fog lights, good front bumper, good front wings, good bonnet, carbon fibre door cards and console, hi-rise rear brake light, good discs, good calipers, newish centre exhausts (genuine vx ones)

Engine is as sweet as a nut. I will strip the engine for cams, plenum, throttle bodies and intake ducting, plus all sensors, ancillkiaries UNLESS someone wants the whole engine. Dave drove it back from Peterborough and it drives fine. Gearbox is perfect as is clutch.

Also has Cruise, which is available to MarksDTMCalib first refusal.

Every other bit you can think of for a 3.0 MV6 saloon, so ask away.

I will not give stuff away, but won't rip you off either. Make me an offer for anything by PM. I can only say yes or no.

I will move this to the for sale scetion later tonight.
Title: Re: Ronnie Project 11 arrived
Post by: Mini_Issunaz on 19 August 2006, 17:15:41
My daddy said will the cruise control fit his 1998 MV6?

If so, can he have second dibs please?

Mandy
Title: Re: Ronnie Project 11 arrived
Post by: TheBoy on 19 August 2006, 17:15:53
Wondered why you were breaking? MV6 manaul is normally sought after?

How bad is passenger rear door?
Title: Re: Ronnie Project 11 arrived
Post by: tunnie on 19 August 2006, 17:31:49
Quote
Wondered why you were breaking? MV6 manaul is normally sought after?

How bad is passenger rear door?


I am wondering why your breaking as well  :

I know how much you paid for it, you should be able tripple your money at the bar min for no work?
Title: Re: Ronnie Project 11 arrived
Post by: Taxi_Driver on 19 August 2006, 17:32:49
Quote
Wondered why you were breaking? MV6 manaul is normally sought after?

How bad is passenger rear door?

I wondered that as well?
If its the rust on the doors, give it to Tunnie to fix up.....he's a dab hand with his paint brushes [smiley=vrolijk_26.gif]
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 19 August 2006, 17:41:40
Yeah why are you breaking it?

pm sent for a few bits  ;)
Title: Re: Ronnie Project 11 arrived
Post by: tunnie on 19 August 2006, 17:47:56
Quote
Quote
Wondered why you were breaking? MV6 manaul is normally sought after?

How bad is passenger rear door?

I wondered that as well?
If its the rust on the doors, give it to Tunnie to fix up.....he's a dab hand with his paint brushes [smiley=vrolijk_26.gif]


Would't say that, the pictures on AT hid the rust very well, but cheers  ;)

Seriously though, if its not that bad:

A. The new owner could sort it.
B. Have a go yourself... take all the rust off. Tinist amount of filler to smooth out the bumps, and some colour match spray....
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 19 August 2006, 17:52:00
knowing Ronnnie he is up to something and knows he can make more breaking it.  :)

I have found this out three times now....!
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 19 August 2006, 17:55:13
Breaking it because it is worth more in parts. The windscreen is gone, as are the wishbones and steering idler. Bodywork is shabby on the doors. By the time I bring it back to nice condition and put a new MoT on, it will cost another £300+. Hence, stripping it to the bone.

Cruise is with the stalk, unit, relay etc.

Engine £250 complete or 3.0 Cams £100

Xenon headlights (real ones) WITH gebuyine working bulbs and ballast units £100 pair.

Front grille £8

Front fogs, £15 each

Alloys £80 (one tyre is brand spanking new, 2 fronts are Pirelli and just about legal, Other tyre is slick)

Climate control panel £50

CCRT700 radio with phone and 6 disc changer unit PLUS GID display (perfect all piuxels working) £125

Rear window motors and set of switches £30

Carbon fibre door cards, centre tray and centre climate panel £40

Tilting steeing wheel with column and airbag - Offers

Central locking motors - Offers

Front bumper £20

Wings £15 each

Bonnet £20

Battery £10

Battery cover £10

Relays, various - offers

OSR light cluster - £8

Boot Clusters (L or R) £5 each

Rear bumper ( good condition byut slight marks) £15

Door rubbers - £5 each, OSR taken by me!

Any window - £5

Discs £10 pair

Calipers £20 pair

Manual Gearbox with clutch, drive plate and lever etc - Offers

Radiators - Offers

Aircon compressor - £50

Alternator - £25

PAS pump - £15

Aux tensioner - £8

header tank with sensor £10

Cam covers - £10 each

All other parts by request.

NO POACHING MY LISTING!!!!!
Title: Re: Ronnie Project 11 arrived
Post by: tunnie on 19 August 2006, 17:55:31
Quote
knowing Ronnnie he is up to something and knows he can make more breaking it.  :)

I have found this out three times now....!

Some '99 MV6's going for above 2k on AT....

** edit... guess there is more money in stripping it!
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 19 August 2006, 17:58:28
Yup i thought that same as my cdx

Ronnie your (probably deliberatly) under estimating a lot

Fogs will go for £40 - 50

Also its amazing what some people will buy - the odd switch here and there etc

Good Luck

How long do you think it wil take you ?

Title: Re: Ronnie Project 11 arrived
Post by: TheBoy on 19 August 2006, 17:59:44
Fogs are arounf £50 each from dealer, and around £20 - £25 on ebay, so I reckon £15 is a very good price...
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 19 August 2006, 18:02:27
Wing mirrors as well - sold mine for £35. It all adds up!
Title: Re: Ronnie Project 11 arrived
Post by: Bo Bo on 19 August 2006, 18:20:02
Can I have first dibs on the alloys?
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 19 August 2006, 18:23:12
OK, Cams SOLD so Engine no longer available as a whole working one.

The car will be totally stripped and crushes within a week.

Every usable part is coming off. Switches, relayts, fuses, screws. The lot.

Be quick if you want anything. I know what everything is worth so no silly offers, but I'm not greedy. Just making a quick buck and end of story.

Fogs - I have two sets, all working. Side indiactor lamps by the bucketful.

Spaeksrs anyone? Speaker covers? Mirror switch? Electric mirrors?

This is the time to name that part and ask......
Title: Re: Ronnie Project 11 arrived
Post by: tunnie on 19 August 2006, 18:29:02
thinking about it, are the speaker grills black??

If so i'll have the off the drivers door  :)
Title: Re: Ronnie Project 11 arrived
Post by: Phil on 19 August 2006, 19:27:22
PM sent  :)
Title: Re: Ronnie Project 11 arrived
Post by: Andy B on 19 August 2006, 19:36:12
It's shame you're not closer or I'd have had the front bumper. Mines scuffed on the black textured bit.  :(
Title: Re: Ronnie Project 11 arrived
Post by: LouisCorney on 19 August 2006, 19:38:45
Is the front grille still available?

If so, I'll take it please
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 19 August 2006, 20:09:46
Front Grille? Yes Louis. Yours if you want it. PM me and I will get details etc.....

Speakers, I think black yes, so if you wnat the front drivers one no problem Tunnie....
Title: Re: Ronnie Project 11 arrived
Post by: JamesV6CDX on 20 August 2006, 03:03:19
Hiya Fin, what are the 6 HT leads like? Have they been soaked in oil?

Mine are pretty awful, and seeing as my Omega is an N reg CDX V6 with 120k, I am not too particular about using new GM parts as long as I keep it on the road (I'm saving for a facelift elite!)

If the leads are in very good nick, what do you want for them, out of interest?

Cheers
James
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 08:23:38
The drivers bank leads are new, passenegre side I can't tell yet. I was going to keep them for me - just in case TBH. DIS pack is also staying, unless anyone wants to make me an offer on either/both?
Title: Re: Ronnie Project 11 arrived
Post by: nigsey1600e on 20 August 2006, 08:29:06
Is the rear boot spoiler the same as a facelift one if yes how much£

cheers
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 08:36:27
Not sure on that one. Here is a pic of both. Click on the pic for enlargement. Price? make me an offer.

(http://i40.photobucket.com/albums/e219/ronaldmcburger/th_fd_1.jpg) (http://i40.photobucket.com/albums/e219/ronaldmcburger/fd_1.jpg)

(http://i40.photobucket.com/albums/e219/ronaldmcburger/th_7b_3.jpg) (http://i40.photobucket.com/albums/e219/ronaldmcburger/7b_3.jpg)

Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 08:44:47
This car has REAL Xenons and TILTING STEERING WHEEL. Alloys will be very cheap and it has one BRAND NEW 17" tyre!

Exhaust mid sections are fairly new and Genuine VX ones!

Picture the whole car. Everything is available from the engine (what is now left) to a single screw. If you need it, let me know. No freebies but I am not a shark either.
Title: Re: Ronnie Project 11 arrived
Post by: Taxi_Driver on 20 August 2006, 09:18:03
Can i have the cambelt and tensioner please  ::)
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 20 August 2006, 09:56:53
Quote
This car has REAL Xenons and TILTING STEERING WHEEL. Alloys will be very cheap and it has one BRAND NEW 17" tyre!

Exhaust mid sections are fairly new and Genuine VX ones!

Picture the whole car. Everything is available from the engine (what is now left) to a single screw. If you need it, let me know. No freebies but I am not a shark either.


And i will verfy this!! Ronnie is not only easy to deal with but also very very resonable so get your stuff off him here!!!!
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 09:59:34
Taxi Driver - already sold to Laidback for his new ELITE ;)

Markiec - Why thank you sir! Cheque is in the post!!! ;D
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 20 August 2006, 10:05:04
Hee hee - i burst into the house last night from work after doing the deal with you Ronnie and exclaimed to the wife, who was ironing " RONNIES GOT MY HEADRESTS"

Even she stopped ironing and looked shocked  and excited - She knows what they mean to me  ;D
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 11:10:41
Why was your wife ironing Ronnies Got My Headrests? Was it a logo on a T shirt or something? Make sure you use medium heat and not too much steam! ;D
Title: Re: Ronnie Project 11 arrived
Post by: Mini_Issunaz on 20 August 2006, 12:58:08
Any word about the cruise control?

Mandy
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 13:42:56
Sorry Mandy, I missed answering you! Apologies!!!

Mark has first refusal, if he doesn't want it you are next.

Cheers :)
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 20 August 2006, 14:04:13
Quote
Why was your wife ironing Ronnies Got My Headrests? Was it a logo on a T shirt or something? Make sure you use medium heat and not too much steam! ;D
Hee hee very good mate  :)

Actually black tshirt with the yello chicken on the chest with "Ronnies got my Headrests" underneath

The ultimate fashion statement!!!!

Title: Re: Ronnie Project 11 arrived
Post by: TheBoy on 20 August 2006, 15:34:17
Quote
black tshirt with the yello chicken on the chest with "Ronnies got my Headrests" underneath

The ultimate fashion statement!!!!

Don't give Ronnie ideas, or we'll start to see such t-shirts at those tacky shops by the seaside  ;D
Title: Re: Ronnie Project 11 arrived
Post by: Martin_1962 on 20 August 2006, 16:36:25
Quote
Quote
black tshirt with the yello chicken on the chest with "Ronnies got my Headrests" underneath

The ultimate fashion statement!!!!

Don't give Ronnie ideas, or we'll start to see such t-shirts at those tacky shops by the seaside  ;D

I reckon they'ed be popular
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 17:04:36
Seeing as I used to make screen print machines, this will be very easy to set up!

Right, anyone else want any bits. Don't hang around, this car will be crushed within a week.

New type interior light, vanity mirrors (all working). 4 window switch panels, rear window motors, rear central locking solenoids, boot solenoid, good exhaust system, all engine parts except Plenum and Cams, so all sensors, cam covers, inlet manifold, injector rail, working DIS pack, Cable trays, multi ram system, Idle control valve, good EGR valve, good water expansion tank with working sensor, Main radiator for a manual, user manual for 1999 model, leather wallet for car, woking glovebox with working catch, carbon fibre coin tray (in front of handbrake), carbon fibre door trims, REAR ASHTRAYS from doors AND centre, Full set of MV6 recarro type seats including front headrests and both seat heaters working, Full CCRT700 hi-fi/CD changer/Phone system with GID display, or will sell GID on its own at the right price, Full set of MV6 alloys, laque peeling on outer rims, one BRAND new 17" tyre, TILTING STEERING WHEEL column with airbag, passenger airbag, multi speed wiper stalk for saloon, all screws, clips, bolts you can imagine, one set front fog lights perfect, battery, battery cover, another battery cover for the much bigger Diesel batteries too, SOLID rear dog guard for Estate, bungee net for Estate or saloon, loads more....... all fuses, relays, switches etc.
Title: Re: Ronnie Project 11 arrived
Post by: Jay w on 20 August 2006, 17:08:54
i would sooooo like the CCRT700 but funds have eluded me again  >:(
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 17:16:25
I do easy terms mate, always glad to help.

Full system = £125.

Deposit only £120.00 followed by 60 monthly payments of £10.

[size=8]Your home may be at risk if you leave the back door open when you go out. Lifts go up as well as down and you may not receive the same item as mentioned above. We reserve the right to alter anything ever and you agree that we are always right. You have no rights, I am right. Right then. look left then right and write this down.[/size]

Ronnies - the only way.
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 20 August 2006, 17:52:24
 ;D
Complete quality another ronnie one liner classic - every (done) or thought of doing stand up Fin?
Title: Re: Ronnie Project 11 arrived
Post by: Taxi_Driver on 20 August 2006, 17:53:36
Quote
Taxi Driver - already sold to Laidback for his new ELITE ;)

Damm  :(  ;D
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 20 August 2006, 22:17:26
Quote
;D
Complete quality another ronnie one liner classic - every (done) or thought of doing stand up Fin?

I used to be good at stand up. But then my back got really bad and now I have to do the sit down more than stand up. Of course, I can always stand up to be counted, or stand up for the ladies ;) But now we are getting into the twiglett zone. ;D
Title: Re: Ronnie Project 11 arrived
Post by: Auto Addict on 20 August 2006, 22:18:49
Quote
Quote
;D
Complete quality another ronnie one liner classic - every (done) or thought of doing stand up Fin?

I used to be good at stand up. But then my back got really bad and now I have to do the sit down more than stand up. Of course, I can always stand up to be counted, or stand up for the ladies ;) But now we are getting into the twiglett zone. ;D

You should have been on the stage RMB........sweeping it ;D ;D ;D
Title: Re: Ronnie Project 11 arrived
Post by: TheBoy on 20 August 2006, 22:22:58
Quote
You should have been on the stage RMB
the next stage out of town ;D

Actually, Ronnie is my best friend today ;)
Title: Re: Ronnie Project 11 arrived
Post by: PaulW on 21 August 2006, 08:54:28
Few prices if you can please!  (will see what I can afford)

ABS ECU (just hope it matches the same as mine, duno what number it is yet!)
Rear Leccy Windows & switches & such...
Fuel-flap locking solenoid
the plastic lining/covering/whatever it is which sits infront of the battery (follows the line of the middle section with all the german warning stickers on, etc...)
Central arm rest (if it has it) just the spring for the locking clip
N/S boot-hatch fog light plastic glass covering thingy

Appologies for any spelling mistakes or sounding a little dumb on describing items, but I just finished a night shift at work and feel like crap!

[edit]Oh, and will the 1999 user manual cover my 98-R baby facelift?  if so that too![/edit]
Title: Re: Ronnie Project 11 arrived
Post by: sounds2k on 21 August 2006, 20:12:05
is the wiring loom for the CCRT system complete, is it the Bose setup? If so, I'd be interested in restoring that setup in my old omega that got butchered. This means I'd need the head unit and cage, wiring loom from driver's kick panel to amp under parcel shelf and back to speakers (unless there are any joins in between?) and the amplifier. It has the correct speakers in the doors and the parcel shelf though.

Does the MV6 have a rear blind, if so does it work and what colour is the interior - I'm after a dark grey one ...
Title: Re: Ronnie Project 11 arrived
Post by: Marks DTM Calib on 21 August 2006, 21:57:25
Its MV6 so no Bose.

Just taken the following off for MrMcB

Cams
Cruise (available as I am not having)
Alternator
Plenum
Inlet
Air trunking and multiram
Rad

Plus other odds and sods.

Heads tomorrow etc.....

Mr McB will post a full list, thats just what I removed!
Title: Re: Ronnie Project 11 arrived
Post by: Mini_Issunaz on 21 August 2006, 22:03:18
Cruise control has already been claimed!!  ;)
Title: Re: Ronnie Project 11 arrived
Post by: Marks DTM Calib on 21 August 2006, 22:13:15
Its all there, even includes the mounting nuts and spring clip for the throttle assembly.....
Title: Re: Ronnie Project 11 arrived
Post by: Mini_Issunaz on 21 August 2006, 22:15:15
Quote
Its all there, even includes the mounting nuts and spring clip for the throttle assembly.....

Just need a 'How To' now  ;)
Title: Re: Ronnie Project 11 arrived
Post by: tunnie on 21 August 2006, 22:17:47
Quote
Quote
Its all there, even includes the mounting nuts and spring clip for the throttle assembly.....

Just need a 'How To' now  ;)

Think someone posted pics someware.... its and easy enough job
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 21 August 2006, 23:19:47
Quote
Few prices if you can please!  (will see what I can afford)

ABS ECU (just hope it matches the same as mine, duno what number it is yet!)
Rear Leccy Windows & switches & such...
Fuel-flap locking solenoid
the plastic lining/covering/whatever it is which sits infront of the battery (follows the line of the middle section with all the german warning stickers on, etc...)
Central arm rest (if it has it) just the spring for the locking clip
N/S boot-hatch fog light plastic glass covering thingy

Appologies for any spelling mistakes or sounding a little dumb on describing items, but I just finished a night shift at work and feel like crap!

[edit]Oh, and will the 1999 user manual cover my 98-R baby facelift?  if so that too![/edit]

PM sent.....
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 21 August 2006, 23:25:47
OK guys. Busy day indeed today. Thanks a million to Mark and Pete for their invaluable help in stripping this car to its bones in 2 hours! Not much left to take off. I'll be working through the orders tomorrow then I will list exactly what is available, inlcuding the tilting steering column, full ECU & immobiliser with key chip, front fog lights, Alternator, PAS pump, etc.

Anyone want these MV6 seats or do I burn them?

Two front pipes with CATS!

Good front bumper in silver.

be very quick now guys. Car is being scrapped on Wednesday hopefully, so whatever you want ask now. Screws, clips, bolts etc. All available.

Perfect glovebox with working catch etc......
Title: Re: Ronnie Project 11 arrived
Post by: PaulW on 22 August 2006, 08:05:17
If your just going to burn the MV6 seats or scrap with the car, I'll have them for free  :-*  ;D
Title: Re: Ronnie Project 11 arrived
Post by: Robin Hood on 22 August 2006, 08:41:00
The accelerator and choke retaining clips if they have not gone with the plenum and a rear disc/hub retaining/securing bolt that sits behind the wheel.  Thanks
Title: Re: Ronnie Project 11 arrived
Post by: Markie on 22 August 2006, 10:27:23
WOW ronnie thats an astonishing rate of work mate - i would love to have watched that!!!

Well done you guys  :)
Title: Re: Ronnie Project 11 arrived
Post by: Cav9_4 on 25 August 2006, 23:05:53
Hi Ronnie,do u still have the carbon fibre interior door cards etc...regards wayne
Title: Re: Ronnie Project 11 arrived
Post by: TheOutcast on 26 August 2006, 09:53:46
Quote
1999 3.0 MV6 Manual in silver. Everything works, but I am breaking it.

I thought you weren't going to do another? Are the neighbours going to help you strip it? ;D ;D ;D
Title: Re: Ronnie Project 11 arrived
Post by: RonaldMcBurger on 26 August 2006, 10:33:46
Job done, car gone, end of.