Omega Owners Forum

Chat Area => General Car Chat => Topic started by: Martin_1962 on 23 June 2009, 21:06:16

Title: Need scan of 3.0 divider
Post by: Martin_1962 on 23 June 2009, 21:06:16

I am refurbing my original heads, they are better condition than the ones I fitted so want to refit them in a few months.

So apart from green valve seals I need to port.

My 3.0 divider is on the car so can someone scan one so I can make a filing mask?

Thanks

Martin

Title: Re: Need scan of 3.0 divider
Post by: MartinP on 24 June 2009, 23:35:29

Explain in English please Martin, What do you need scanning :-/

Martin

Title: Re: Need scan of 3.0 divider
Post by: Martin_1962 on 24 June 2009, 23:40:42

Quote

Explain in English please Martin, What do you need scanning :-/

Martin

The side of the inlet divider which goes against the head.

Well one port with its bolt holes will be enough.

Martin

Title: Re: Need scan of 3.0 divider
Post by: MartinP on 24 June 2009, 23:59:57

Quote

Quote

Explain in English please Martin, What do you need scanning :-/

Martin

The side of the inlet divider which goes against the head.

Well one port with its bolt holes will be enough.

Martin

Will have a look, might be able to take one to work tomorrow

Martin