Omega Owners Forum
		Chat Area => General Car Chat => Topic started by: goonv6 on 15 August 2009, 22:18:11
		
			
			- 
				I am very pleased with myself. Fitted a 2.5l box to the engine on my own. Car was on axle stands and all I used was two axle stands, a trolley jack, a metal bar and a scissor jack. They don't tell you that in the Haynes manual! [smiley=2vrolijk_08.gif]
			
- 
				well done. worth the effort, blood, sweat & tears. :D
			
- 
				Well done that man, did you change the ATF and/or filter?
			
- 
				Manual box (bit of a rare one I know) Oil is good in it.
			
- 
				Good stuff mate  :y
			
- 
				Today I shall reconnect the driveshaft and shift mechanism, aircon pipes, catalytic converters and touch wood, start it for the first time with its new engine. Yay.
			
- 
				Driveshaft done, gearstick mechanism connected, one cat in. Had a real problem with the aircon pipes as I couldn't get them past the sump to curl round to the pump so had to remove the pump, then of course, it was a bugger to get back in, finally got there. So, tomorrow's jobs:
 Tighten up engine mount
 Connect pipes to pump
 Bleed clutch
 Connect other cat
 Finish electrical connections
 Fill cooling system
 Pray
 Start engine.
- 
				Nice one. :y
			
- 
				don't forget to reverse bleed that clutch....  :y
			
- 
				Spot on!!  Glad you managed to do the deed!   Bit like home made jam- always tastes better than the shop bought stuff!   ;)
			
- 
				Electrical fault stops play. Boo :(
			
- 
				Electrical fault stops play. Boo :( 
 Leccy loom plugged in?