Omega Owners Forum
Chat Area => General Car Chat => Topic started by: tunnie on 01 September 2009, 20:19:48
-
Today my passenger wiper blade decided to self destruct, it was bucketing down, 40mph down the usual
90 70mph A43
About a 2 miles from home it decided to destroy it self, and locking the drivers one too. :o
Managed to see just enough to get home, on further inspection the whole blade just fell to pieces in my hand.
I'll be stealing borrowing father tunnies Omega tomorrow, damn good job we have a fleet of 3 Omegas ;D
-
oops !! :(
-
as said on phone, I have to short ones (18" from memory, might be shorter) to get you out of trouble
-
as said on phone, I have to short ones (18" from memory, might be shorter) to get you out of trouble
Cheers, but since i have Thursday & Friday off, i'll take father tunnies car tomorrow, and take the bike out on Thursday :D
-
as said on phone, I have to short ones (18" from memory, might be shorter) to get you out of trouble
Cheers, but since i have Thursday & Friday off, i'll take father tunnies car tomorrow, and take the bike out on Thursday :D
now if you're going to the dealer on Thurs ::)
Trouble is, you'll need the car ::)
-
as said on phone, I have to short ones (18" from memory, might be shorter) to get you out of trouble
Cheers, but since i have Thursday & Friday off, i'll take father tunnies car tomorrow, and take the bike out on Thursday :D
now if you're going to the dealer on Thurs ::)
Trouble is, you'll need the car ::)
What do you need?
-
as said on phone, I have to short ones (18" from memory, might be shorter) to get you out of trouble
Cheers, but since i have Thursday & Friday off, i'll take father tunnies car tomorrow, and take the bike out on Thursday :D
now if you're going to the dealer on Thurs ::)
Trouble is, you'll need the car ::)
What do you need?
Got some shocks on order, and some wiper spoilers, and a ICV rubber pipe, should be in Thursday morning ::)
-
added to that, could do with a new pair of wipers anyway
-
when you changing all these then Jaime?
-
Oh, and none of its paid for yet ::)
-
when you changing all these then Jaime?
Shocks at Newent. Might slap on a new cambelt if time permits, in which case the ICV pipe can go on :y
-
as said on phone, I have to short ones (18" from memory, might be shorter) to get you out of trouble
Cheers, but since i have Thursday & Friday off, i'll take father tunnies car tomorrow, and take the bike out on Thursday :D
now if you're going to the dealer on Thurs ::)
Trouble is, you'll need the car ::)
What do you need?
Got some shocks on order, and some wiper spoilers, and a ICV rubber pipe, should be in Thursday morning ::)
Only need a couple of blades, like to take bike out, but if you need them
urgently?
-
Oh, and none of its paid for yet ::)
should get an account :y
dead easy for me now...anyone picks my bits up, I get invoiced :y
-
when you changing all these then Jaime?
Shocks at Newent. Might slap on a new cambelt if time permits, in which case the ICV pipe can go on :y
be interested to see the fronts done :y
-
as said on phone, I have to short ones (18" from memory, might be shorter) to get you out of trouble
Cheers, but since i have Thursday & Friday off, i'll take father tunnies car tomorrow, and take the bike out on Thursday :D
now if you're going to the dealer on Thurs ::)
Trouble is, you'll need the car ::)
What do you need?
Got some shocks on order, and some wiper spoilers, and a ICV rubber pipe, should be in Thursday morning ::)
Only need a couple of blades, like to take bike out, but if you need them
urgently?
It would save me the stupid rush Friday morning trying to pick her up and then shoot off to Newent. Need bits for Newent.
Go on, father tunnies car needs a ragging, then you can blast the bike later. Besides, those blades are a bit long to carry on a bike safely.
-
Oh, and none of its paid for yet ::)
should get an account :y
dead easy for me now...anyone picks my bits up, I get invoiced :y
Too many people use my TC account at this dealer, an invoice account would lead to disputes I reckon...
-
thats true, this is mine, all mine i tell you, my precious ;D
-
Oh, and none of its paid for yet ::)
should get an account :y
dead easy for me now...anyone picks my bits up, I get invoiced :y
Too many people use my TC account at this dealer, an invoice account would lead to disputes I reckon...
Damn almost had a free account then ::)
I'll see what i can do, prob head down there tommorow lunch time ish
-
Oh, and none of its paid for yet ::)
should get an account :y
dead easy for me now...anyone picks my bits up, I get invoiced :y
Too many people use my TC account at this dealer, an invoice account would lead to disputes I reckon...
Damn almost had a free account then ::)
I'll see what i can do, prob head down there tommorow lunch time ish
Cheers :y
If I'm not around, find somewhere dry in back garden, and I'll sort monies out early next week if thats OK? :y
-
Oh, and none of its paid for yet ::)
should get an account :y
dead easy for me now...anyone picks my bits up, I get invoiced :y
Too many people use my TC account at this dealer, an invoice account would lead to disputes I reckon...
Damn almost had a free account then ::)
I'll see what i can do, prob head down there tommorow lunch time ish
Cheers :y
If I'm not around, find somewhere dry in back garden, and I'll sort monies out early next week if thats OK? :y
Yeh, np, i'll wack it on the credit :)
-
Cheers.
Now if you came to Newent, you could bring your jack, and fit the tinkers :o
-
Cheers.
Now if you came to Newent, you could bring your jack, and fit the tinkers :o
Sod that! ;D
-
Now if you came to Newent, you could bring your jack, and fit the tinkers :o
I'll be in Manc for Newent (which is a shame), but I'll wager you a years supply of weed that I could do both your front shocks (that's start to finish) before you'd managed to roll me a half oz from start to finish :D
-
Now if you came to Newent, you could bring your jack, and fit the tinkers :o
I'll be in Manc for Newent (which is a shame), but I'll wager you a years supply of weed that I could do both your front shocks (that's start to finish) before you'd managed to roll me a half oz from start to finish :D
its not a long job, its usually the spring compressors that take me ages, and then getting the camber right afterwards