Omega Owners Forum
Chat Area => General Car Chat => Topic started by: SP_3.2 on 21 July 2010, 13:08:48
-
No not what you lot think ;D ;D. In ref to the car, Chris gave the donut bushes a check at the Oxford meet at the weekend and they were done in.
Have just had a new set fitted and the car feels great lot less action from the back and feels much more planted and less drama in the corners.
Thanks for checking them Chris and Mark thanks for the link for them :y :y
Looking forward to a good drive to the park for training later. ;)
-
good work get em out / in ok?
The Febi Bilstein ones?
-
Told me that they where not too bad. The rubber had come away on the old one :o :o, but then again they have done 190k
Yep it,s the Febi one where about £15 each :y
-
what did you have to pay for fitting? and had you supplied the bushes?
-
Had it done free as i Train the guy at my gym and only charge him 1/2 my normal cost to try it out.
Supplied the parts they from go old
http://www.vauxhallworldparts.com/. Great service and here the next day. Can see i will be using the alot.
-
Hmmm, they MV6 could do with a bit of that....
-
Hmmm, they MV6 could do with a bit of that....
Still ? :o
i know your busy but....mind you, mot time soon isn't it?
-
I knew this wasn't going to be about Daz ;D
-
good news Steve.
has anyone concidered poly bushes for these? i know razzo has them. TB?
-
Hmmm, they MV6 could do with a bit of that....
Still ? :o
i know your busy but....mind you, mot time soon isn't it?
It was MOT'd just before the LPG saga....
-
good news Steve.
has anyone concidered poly bushes for these? i know razzo has them. TB?
I would like to replace mine with poly B's when they are ready. Dunno where to get them from though. Plus what other poly bushes are availble.
Would be nice to have a list of links for updated parts as a reference somewhere. :y
-
Sorry to hijack this! What is the proper name for donut bushes, where is the best place to get them and how much do they cost? Thanks!
-
Sorry to hijack this! What is the proper name for donut bushes, where is the best place to get them and how much do they cost? Thanks!
Its this little chap here:
http://www.vauxhallworldparts.com/partsearch/partdetail.php?partid=857
-
Sorry to hijack this! What is the proper name for donut bushes, where is the best place to get them and how much do they cost? Thanks!
Rear Axle Crossmember Bush (Possibly)
http://www.vauxhallworldparts.com/partsearch/p7.php
-
good news Steve.
has anyone concidered poly bushes for these? i know razzo has them. TB?
I would like to replace mine with poly B's when they are ready. Dunno where to get them from though. Plus what other poly bushes are availble.
Would be nice to have a list of links for updated parts as a reference somewhere. :y
Easy enough to get front wishbone bushes and front anti roll bar buses. (e.g. ebay)
Rear donut bushes are harder to source and you may have to import them
-
good news Steve.
has anyone concidered poly bushes for these? i know razzo has them. TB?
This is fromm razzo himself
i got the subframe or doughnut bushes from here
http://www.regal-shop.co.uk/
They were K-mac ones they import from Oz, not listed on their website so you may have to ring em
part number was 202527
HTH Dave
-
Whats the general consensus on the best way to remove and fit these? Bushes on my landrovers were always a nightmare, was burn or cut on most of them, same with these? Presume its only 2 I need as well?
Cheers,
Iain
-
there is a guide in maintenance with parts link, two off, usually a claw hammer and lots if grunting is enough. Although i had to resort to a baring puller and some fiddling with mine.