Omega Owners Forum
Chat Area => General Car Chat => Topic started by: Raymienets on 02 September 2010, 23:58:43
-
No noise when stationary and revs appear normal. But when driving feels as if engine is gonna take off. Spanner light comes on now and again. will have to get it checked pronto :( :(.
-
Would suggest SAI, but you dont have it.
Get under the bonnet, have someone rev the car and see if the noise is there. If not, then it's a transmission/gearbox issue.
-
Diff whine maybe,would tie in with the fact its there when driving and not stationary
Certainly seems something thats turning i.e Diff, prop, half shafts or road wheels
I would check out the diff mate although ive not heard of this problem much on a Miggy,but it is a mechanical component so it could be...
I had a 2.6 Carlton estate a few years back which had a diff whine, and it did sound like a jet plane when it got above 20 mph
-
By the way if your near Barrhead,bring it over and i can have a look if you want :y
-
By the way if your near Barrhead,bring it over and i can have a look if you want :y
Cheers mate for the offer in the East End. will have a proper look and will post findings.
-
Spanner light on but no error codes.
>:(
-
What code reader did you use?
-
What code reader did you use?
Not really up to scratch on these things just a cheapy a bought a couple of year ago from argos. RAC fault code reader.
-
Bring it over,and i'll plug it in for you, I dont have a Tech II but what i do have works well,no charge mate just happy to help fellow Miggy's
-
Bring it over,and i'll plug it in for you, I dont have a Tech II but what i do have works well,no charge mate just happy to help fellow Miggy's
Cheers for the offer mate but is awkward as I work shifts. Maybe catch up at a meet sometime. What do you use to read your codes if you don't mind me asking.
-
Bring it over,and i'll plug it in for you, I dont have a Tech II but what i do have works well,no charge mate just happy to help fellow Miggy's
As mentioned could possibly be my wheels. replaced them a few months ago. Still need to find why the Spanner light comes on every now and again.
Cheers for the offer would like to take you up on that mate but I work shifts. What do you use to read your codes if you don't mind me asking.
-
Jet engine noise confirmed as front nearside wheel bearing... erm.... slightly worn!
Good though as an easy fix.. good to meet you today mate..
Nice Miggy,you really should get some pics on here :y
-
Will do