Omega Owners Forum
Chat Area => General Car Chat => Topic started by: david036 on 27 September 2010, 19:54:29
-
Have a suspected cam belt snap. Is likely to have done valve damage or can this engine get away with just replacing the belt? Its a 1.6 16v Thanks
-
probably. the last motor i recall to be "freewheeling" is the old fiat panda block. :(
-
Have a suspected cam belt snap. Is likely to have done valve damage or can this engine get away with just replacing the belt? Its a 1.6 16v Thanks
Defo, modern high compression multi valve engines and a snapped belt equals bent bits!
-
Dependant on the year it's possibly cheaper to source a 2nd hand head and just do a head swop on it with a new timing belt kit.
-
nope.. sure there is damage.. but at least wont cost like a v6 :-/
-
Dependant on the year it's possibly cheaper to source a 2nd hand head and just do a head swop on it with a new timing belt kit.
Just done that with an old 406 16v, got a s/hand head for a ton. Much cheaper than buying 16valves and the labour of changing them all :y
Edit, not seen a 16v Renault engine survive the belt breaking without damage :-/
-
Tell you what, I'll give you a tenner for it ;) :P ;D
-
If it makes any difference its a y reg 2000!!! Had only done 70k
-
yes you can expect bent valves
recomended interval for belt change
is 72000 miles or 5 years
-
http://www.diamondmotors.co.uk/archives/tag/k4m
-
If it makes any difference its a y reg 2000!!! Had only done 70k
Worth saving then!?
Where are you David? I may be able to help in the head department sourcing a 2nd hand head and fitting if needed :y
(I thought I'd better re-phrase that before you dirty mided lot start!)
-
If it makes any difference its a y reg 2000!!! Had only done 70k
Worth saving then!?
Where are you David? I may be able to help in the head department sourcing a 2nd hand head and fitting if needed :y
(I thought I'd better re-phrase that before you dirty mided lot start!)
perish the thought ;D ;D ;D :y
-
If it makes any difference its a y reg 2000!!! Had only done 70k
Worth saving then!?
Where are you David? I may be able to help in the head department sourcing a 2nd hand head and fitting if needed :y
(I thought I'd better re-phrase that before you dirty mided lot start!)
Pm sent!!
-
Lee..............
We wouldn't dream of it!!
Much.
-
If it makes any difference its a y reg 2000!!! Had only done 70k
Worth saving then!?
Where are you David? I may be able to help in the head department sourcing a 2nd hand head and fitting if needed :y
(I thought I'd better re-phrase that before you dirty mided lot start!)
Pm sent!!
and replied ;) :y
-
Lee..............
We wouldn't dream of it!!
Much.
Exactly ;D ;D ;D