Omega Owners Forum

Chat Area => General Car Chat => Topic started by: tunnie on 09 September 2011, 18:22:06

Title: A student method of getting oil from plug wells...
Post by: tunnie on 09 September 2011, 18:22:06
So doing mother T's cam cover gasket, the passenger side was totally fubared, I got bit bored of trying to soak up the oil with paper towels, used loads only did a fraction of first plug, had 2 more to go.

So ex-student bodge time, I found an old de-icer sprayer, junked the bottle, got a plastic cup out & put the sucking nozzle into the plug well.

Because the oil is thicker than water, it does not 'spray' it out, comes out as a dribble, but its soooooo much faster, talking seconds to empty a full plug well:

(http://dl.dropbox.com/u/803897/Omega/Misc/Photo%2009-09-2011%2013%2006%2031.jpeg)
Title: Re: A student method of getting oil from plug wells...
Post by: cem_devecioglu on 09 September 2011, 18:30:15
 ;D ;D :y
Title: Re: A student method of getting oil from plug wells...
Post by: Gaffers on 09 September 2011, 18:33:45
actually thats pretty good :y

I normally use a 50ml syringe and some O2 piping but for when the day comes that I will longer have access to that stuff....
Title: Re: A student method of getting oil from plug wells...
Post by: aaronjb on 09 September 2011, 18:35:16
I tried that trick on a friends Jag (XKR - nice car, when it's not running on 4 cylinders  ;D ) - worked for about three pumps and then gave up (as the actress said to the bishop).

Clearly you need to use a good quality sprayer ;)

But yes, it beat paper towels! :y
Title: Re: A student method of getting oil from plug wells...
Post by: aaronjb on 09 September 2011, 18:37:23
Quote
actually thats pretty good :y

I normally use a 50ml syringe and some O2 piping but for when the day comes that I will longer have access to that stuff....

Ebay has a large selection of syringes ;) (the mind boggles! ;D)
Title: Re: A student method of getting oil from plug wells...
Post by: tunnie on 09 September 2011, 18:38:17
Quote
I tried that trick on a friends Jag (XKR - nice car, when it's not running on 4 cylinders  ;D ) - worked for about three pumps and then gave up (as the actress said to the bishop).

Clearly you need to use a good quality sprayer ;)

But yes, it beat paper towels! :y

Father T likes those, might be a future replacement :)

The sprayer was your average one, but it worked ok, I found slow 'pumps' (oooo errr!) were better.

@guffer - Syringe would be better, but I like bodges  ;D
Title: Re: A student method of getting oil from plug wells...
Post by: Andy B on 09 September 2011, 19:45:55
Quote
.... but for when the day comes that I will longer have access to that stuff....

you'd better start a collection at home then  ::) ::)

I have no idea where my 60ml syringe came from .....  :-/ :-/ :-/
Title: Re: A student method of getting oil from plug wells...
Post by: Ian_D on 09 September 2011, 21:30:05
Good idea. Will remember that for the future  :)

My method used an old compressor from a fridge, some piping, and an old wine bottle.

Compressor pump inlet --> Wine bottle (used as a catch tank for all the oil etc) --> plug wells  :y

Worked well until some idiot binned it thinking it was rubbish!  >:( >:( >:( >:(
Title: Re: A student method of getting oil from plug wells...
Post by: tunnie on 09 September 2011, 21:36:37
Quote
Good idea. Will remember that for the future  :)

My method used an old compressor from a fridge, some piping, and an old wine bottle.

Compressor pump inlet --> Wine bottle (used as a catch tank for all the oil etc) --> plug wells  :y

Worked well until some idiot binned it thinking it was rubbish!  >:( >:( >:( >:(


The Mrs?  ;D
Title: Re: A student method of getting oil from plug wells...
Post by: Andy B on 09 September 2011, 22:05:38
Quote
Good idea. Will remember that for the future  :)

My method used an old compressor from a fridge, some piping, and an old wine bottle.

Compressor pump inlet --> Wine bottle (used as a catch tank for all the oil etc) --> plug wells  :y

Worked well until some idiot binned it thinking it was rubbish!  >:( >:( >:( >:(

 :'( :'( It was a great bit of kit .............. not the prettiest of contraptions though (maybe that's why someone thought it was scrap  ::) ::))
Title: Re: A student method of getting oil from plug wells...
Post by: Stallion on 09 September 2011, 22:20:13
Sounds pretty usefull, now need to find some oil in the well to put it to the test!  ;) :y
Title: Re: A student method of getting oil from plug wells...
Post by: Webby the Bear on 09 September 2011, 22:57:34
i've seen it done with a pink syringe................ DLK said he liked the colour!!!!!  :) :) :) :)
Title: Re: A student method of getting oil from plug wells...
Post by: cem_devecioglu on 09 September 2011, 22:59:57
must admit , I would never imagine a solution like that :y
Title: Re: A student method of getting oil from plug wells...
Post by: Vamps on 09 September 2011, 23:21:02
Nice Tip Tunnie...... :y
Title: Re: A student method of getting oil from plug wells...
Post by: TheBoy on 10 September 2011, 07:42:17
I'm a syringe man as well.  Surprised Tunnie didn't just use an air compressor and bolw it out ;D
Title: Re: A student method of getting oil from plug wells...
Post by: Auto Addict on 10 September 2011, 07:52:07
Quote
I'm a syringe man as well.  Surprised Tunnie didn't just use an air compressor and bolw it out ;D

Splatters everywhere when you do that.
Title: Re: A student method of getting oil from plug wells...
Post by: TheBoy on 10 September 2011, 08:24:08
Quote
Quote
I'm a syringe man as well.  Surprised Tunnie didn't just use an air compressor and bolw it out ;D

Splatters everywhere when you do that.
Stops rust :P
Title: Re: A student method of getting oil from plug wells...
Post by: Auto Addict on 10 September 2011, 14:16:54
Quote
Quote
Quote
I'm a syringe man as well.  Surprised Tunnie didn't just use an air compressor and bolw it out ;D

Splatters everywhere when you do that.
Stops rust :P

So, you don't use that method then ;D :P
Title: Re: A student method of getting oil from plug wells...
Post by: zirk on 10 September 2011, 15:00:19
I use a Solder Sucker and a bit screen wash pipe, release the plunger slowly after pushing the button.

You can get suckers off the Chinese Bay for about a pound.

Chris.  :y
Title: Re: A student method of getting oil from plug wells...
Post by: TheBoy on 11 September 2011, 18:31:39
Said student now has a syringe, courtesy of my previous employer  :-X
Title: Re: A student method of getting oil from plug wells...
Post by: 2woody on 12 September 2011, 16:16:56
why not just take the plugs out and let is be burned ?

it's what I always do
Title: Re: A student method of getting oil from plug wells...
Post by: tunnie on 12 September 2011, 16:56:36
Quote
why not just take the plugs out and let is be burned ?

it's what I always do

had crossed my mind, I did that with plug 1, but do remember someone telling me it does not do the cat any good?  :-/
Title: Re: A student method of getting oil from plug wells...
Post by: 2woody on 13 September 2011, 08:56:31
a little smoke for five seconds and all is right. Much less messy
Title: Re: A student method of getting oil from plug wells...
Post by: jackzxcasd4 on 13 September 2011, 09:05:53
actually thats pretty good

I normally use a 50ml syringe and some O2 piping but for when the day comes that I will longer have access to that stuff....