Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Shackeng on 21 December 2009, 15:58:14

Title: Wanted door strip
Post by: Shackeng on 21 December 2009, 15:58:14
Hi All, I need a door buffer strip for the rear O/S door of my '99 CDX Estate (non-colour matched). The front edge has popped out and now catches the front door rear edge, so chrome strip is bent also.

Thanks.
Title: Re: Wanted door strip
Post by: Jimbob on 21 December 2009, 16:58:34
[movedhere] Test Zone [move by] Jimbob.
Title: Re: Wanted door strip
Post by: Jimbob on 21 December 2009, 16:59:00
Not sure the prefacelift strips transfer, so may be dealer time  :'(
Title: Re: Wanted door strip
Post by: Shackeng on 21 December 2009, 17:03:37
thanks JB, I 'm sure a new one is not that dear.

Cheers :y
Title: Re: Wanted door strip
Post by: Welung666 on 23 December 2009, 15:09:06
They are changable, just get to your local motor factors for some trim tape.

You need a putty knife or similar and carefully push top and bottom to cut the existing trim tape, then slide the strip off the clips. Use a hairdryer to heat and peel the remainder off the paintwork. Re-fitting is the reverse but leave the backing on the trim tape till it's clipped in then peel it off so it sticks :y

I've only got a passenger side rear strip left here.
Title: Re: Wanted door strip
Post by: TheBoy on 23 December 2009, 15:25:35
I'm guessing Welung666 has done it, and has more patience than me!

I went down the dealer route, around £55 + VAT for front door.
Title: Re: Wanted door strip
Post by: Jim on 23 December 2009, 16:06:12
Follow this link

http://www.carpartsconnexion.co.uk/vauxhall/partdetail.asp?dp=39920&f=Vauxhall&m=OMEGA&y=Any+year&cat=12&