Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Xplicit 2.0 on 12 March 2010, 08:18:55
-
... Projector type headlights (non xenon/just the units?) im told its a pain to wire in xenon for pre face lifts but i like the look of the projectors
PM me price inc. Postage (if not local)
cheers
-
I saw some on ebay in the last couple of days, very cheap, not sure if the auction has finished yet though.
Alan
-
how cheap is cheap? the ones i see on ebay are like £50 + postage and thats jus for one side... people on here hav sold for £40 for both sides
-
Its a piece of cake to wire the HID headlight units...pain if you want to make it fully legal and wire in the sensors too...
-
to make things a little better heres a pic of what im trying to find
(http://img163.imageshack.us/img163/4173/211bw.jpg)
-
hi what year is your omega cause i have both projector style headlights if your omega is 99 98 back the way then its not a pain to wire up the xexon headlights as i have done it 3 times in the omegas i have had .
-
mines a '96 pre face saloon mate
-
i have a pair in the omega im breaking, the lights look the same as that, and they are only a few months old. drop down and have a look if you want mate
-
PM's have been sent :y
-
I bought what I was told were projector lamps off of ebay to fit to a 96 omega to replace the yellowed original lights, unfortunately it would appear that they are the HID version. Does anyone know what additional parts are needed? At the moment the obvious one I am missing is a loom connection to the 2 pin connection on the high voltage 'ECU'? mounted to the bottom of the headlamp.
Unless I have become confused I understood there was the 'original lamp' fitted to base models which was then replaced with a light referred to as 'projector lamps' (at minor facelift) and then the top of the range 'HID lamps' fitted to models pre major face lift.
Any assistance, clarification and education would be gratefully received.
Regards
-
I bought what I was told were projector lamps off of ebay to fit to a 96 omega to replace the yellowed original lights, unfortunately it would appear that they are the HID version. Does anyone know what additional parts are needed? At the moment the obvious one I am missing is a loom connection to the 2 pin connection on the high voltage 'ECU'? mounted to the bottom of the headlamp.
Unless I have become confused I understood there was the 'original lamp' fitted to base models which was then replaced with a light referred to as 'projector lamps' (at minor facelift) and then the top of the range 'HID lamps' fitted to models pre major face lift.
Any assistance, clarification and education would be gratefully received.
Regards
http://www.omegaowners.com/forum/YaBB.pl?num=1236623769
http://www.omegaowners.com/forum/YaBB.pl?num=1242141893
-
the difference between them all, as far as i can tell, is that the normal ones are normal and go yellow, Projectors are the headlamps that have the Hella lamp inside them (like a little bubble which is th main beam) and the HID head lamps use the projector headlamp housing, but have HID Xenon lamps.
U may also need the Ballasts as well. And iirc, apparently only Elite spec pre facelift had the loom for HID... im more than likely wrong so dont hold me to it :-/ :y
-
Got projectors here like the ones you need
£50 plus postage, just over a year old and in very good condition.
Also have an HID kit for sale obviously at an extra cost
cheers