Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Dan-P on 10 October 2010, 14:33:22

Title: Wanted - ABS ECU for 3.0 manual
Post by: Dan-P on 10 October 2010, 14:33:22
I'm after an ABS ECU in good working order to fit a Y reg 3.0 manual facelift. Can pay by PayPal if easier.

Cheers,

Dan.
Title: Re: Wanted - ABS ECU for 3.0 manual
Post by: Jimbob on 10 October 2010, 15:50:23
[movedhere] Test Zone [move by] Jimbob.
Title: Re: Wanted - ABS ECU for 3.0 manual
Post by: vauxfan2k on 10 October 2010, 20:30:46
can you post up the numbers of your unit as it has to be the same type, there are a few variations.

cheers  ;)
Title: Re: Wanted - ABS ECU for 3.0 manual
Post by: Dan-P on 10 October 2010, 21:21:21
Im not sure on the numbers, am i right in thinking these cannot be seen until the unit is removed? Or is it possible to view from anywhere while still fitted?
If not is there any way to work out which is the correct part number  :-/
Title: Re: Wanted - ABS ECU for 3.0 manual
Post by: sjc on 12 October 2010, 20:06:52
You need to remove the control unit box as the part number is underneath - clever, eh?

Only a few torx bolts though - remove the ones you can see holding the cover down, remove the cover, and pull off the wiring connectors and lastly, remove the torx screw marked "+".  Should now lift off.

BTW, I only have a very early one and that certainly won't be what your after.
Title: Re: Wanted - ABS ECU for 3.0 manual
Post by: scimmy_man on 16 October 2010, 16:47:25
I have one off a 99 mv6 if any good?

still on the car so dont know the number.